Abstract:In the research of lower extremity exoskeleton, how to achieve synchronization between human and machine is quite significant. The intention recognition, which can be divided into three categories including EMG-based, EEG-based and biomechanics-based, is one of the effective implementation methods. In this paper, a new biomechanics-based method to realize the intention recognition is proposed. Compared with the mainstream, this method identifies the characteristic value of stride and frequency during walking, which describes human intention mathematically and concretizes the intention of human movement, improving the accuracy of recognition result and streamlining the algorithm. In addition, the impedance model is designed to further correct the recognition error. The main contents of this paper can be roughly summarized as follows. Gait feature event points are detected according to the angular signals of exoskeleton joints and the pressure signals of foot sole during the wearer’s walking process. Then the whole gait cycle is segmented by the identified gait feature event points, which is used to identify the wearer’s gait step and frequency in the gait cycle and output the trajectory transformed from standard gait trajectory by the recognized stride and frequency. Moreover, the interactive force signal collected by the three-dimensional force sensors mounted on the four-legged bar is provided as input to the designed impedance controller to adjust the transformed trajectory again. Also, the final trajectory is input to the Proportion Integral and Differential (PID) controller to realize the motion function of the lower extremity exoskeleton based on the wearer’s intention recognition result. Moreover, a simple hardware platform of lower limb exoskeleton is designed and built for practical experimental verification, which involves three kinds of gait respectively having constant stride, constant frequency and time-varying stride and frequency. The feasibility and reliability of the proposed algorithm can be concluded by analyzing the satisfactory experiment result.

Intention Recognition for Lower-Limb Exoskeleton

Intention Recgonition For Exoskeleton

Gait-Event-Based human intention recognition approach for lower limb

The Human–Machine Interface Design Based on sEMG and Motor Imagery EEG for Lower Limb Exoskeleton Assistance System

Gait-stride-and-frequency-based human intention recognition approach and experimental verification on lower limb exoskeleton

Design and Control of a Lower Limb Rehabilitation Robot Based on Human Motion Intention Recognition with Multi-Source Sensor Information

Design and Verification of a Human-Robot Interaction System for Upper Limb Exoskeleton Rehabilitation.

An EEG-EMG-Based Motor Intention Recognition for Walking Assistive Exoskeletons

Real-time Onboard SVM-based Human Locomotion Recognition for a Bionic Knee Exoskeleton on Different Terrains

A Brain-Machine Interface Based on ERD/ERS for an Upper-Limb Exoskeleton Control

Control of Upper-Limb Power-Assist Exoskeleton Using a Human-Robot Interface Based on Motion Intention Recognition

Exoskeleton Recognition of Human Movement Intent Based on Surface Electromyographic Signals: Review

Research on Control Method of Upper Limb Exoskeleton Based on Mixed Perception Model.

Real-Time On-Board Recognition of Locomotion Modes for an Active Pelvis Orthosis

Exoskeleton Motion Intention Recognition Based on Multi-sensor Information Fusion

Noninvasive Human-Prosthesis Interfaces for Locomotion Intent Recognition: A Review

Implementation of a Brain-Computer Interface on a Lower-Limb Exoskeleton

A New EEG-based Paradigm for Classifying Intention of Compound-Limbs Movement

Control of Upper-Limb Power-Assist Exoskeleton Based on Motion Intention Recognition.

Multi-class SVM Based Real-Time Recognition of Sit-to-Stand and Stand-to-Sit Transitions for a Bionic Knee Exoskeleton in Transparent Mode.

Recognizing Sit-Stand and Stand-Sit Transitions for a Bionic Knee Exoskeleton