Abstract:A hybrid microsystem with separately functioned temperature controlling substrate and sample operating fluidic microchannel was developed to demonstrate a reconfigurable microfluidics scheme. The temperature controlling substrate integrated a micro heater and a temperature sensor by using traditional silicon-based micromechanical system (MEMS) technique, which guaranteed high performance and robust reliability for repeatable usage. The sample operating fluidic microchannel was prepared by poly-(dimethylsiloxane) (PDMS) based soft lithography technique, which made it cheap enough for disposable applications. The PDMS microchannel chip was attached to the temperature controlling substrate for reconfigurable thermal applications. A thin PDMS film was used to seal the microchannel and bridge the functionalized substrate and the sample inside the channel, which facilitated heat transferring and prevented sample contaminating the temperature controlling substrate. Demonstrated by a one dimensional thermal resistance model, the thin PDMS film was important for the present reconfiguration applications. Thermal performance of this hybrid microsystem was examined, and the experimental results demonstrated that the chip system could work stably over hours with temperature variation less than 0.1°C. Multiple PDMS microchannel chips were tested on one heating substrate sequentially with a maximum intra-chip temperature difference of 1.0°C. DNA extracted from serum of a chronic hepatitis B virus (HBV) patient was amplified by this hybrid microsystem and the gel electrophoresis result indicated that the present reconfigurable microfluidic scheme worked successfully.

Exploitation and Application of a Novel Integrated Microfluidics Heater for Cell Cutlure

Thermomodulated Cell Culture/harvest in Polydimethylsiloxane Microchannels with Poly(n-Isopropylacrylamide)-grafted Surface

A thermo-responsive PNIPAAm-grafted-PDMS surface used for cell culture in microfluidic channels

Laser microfabrication of a microheater chip for cell culture outside a cell incubator

An integrated microfluidic device for long-term culture of isolated single mammalian cells

Self-loading and cell culture in one layer microfluidic devices

An Agar Gel Membrane-Pdms Hybrid Microfluidic Device for Long Term Single Cell Dynamic Study

Openly accessible microfluidic liquid handlers for automated high-throughput nanoliter cell culture.

Establishment of an In Vitro Cell Heating System Based on 3D Cell Culture

A fast cell loading and high-throughput microfluidic system for long-term cell culture in zero-flow environments.

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

Low-Temperature Bonded Glass-Membrane Microfluidic Device for in Vitro Organ-On-A-Chip Cell Culture Models

Novel Microfluidic Perfusion Bioreactor for Vascularized Organ-on-a-Chip

Perfusable Vessel-on-a-Chip for Antiangiogenic Drug Screening with Coaxial Bioprinting

A Novel Microfluidic Platform with Stable Concentration Gradient for on Chip Cell Culture and Screening Assays

3D-Printed Microfluidic Perfusion System for Parallel Monitoring of Hydrogel-Embedded Cell Cultures

Hybrid Microsystem with Functionalized Silicon Substrate and Pdms Sample Operating Microchannel: A Reconfigurable Microfluidics Scheme

An integrative temperature-controlled microfluidic system for budding yeast heat shock response analysis at the single-cell level

Integrated cooling system for microfluidic PDMS devices used in biological microscopy studies

A Digital Microfluidic System with 3D Microstructures for Single-Cell Culture