Effects of shape parameters on aerodynamic performance of high speed trains passing each other in open air

DU Jian,DU Juntao,TIAN Aiqin,TIAN Honglei,LIU Tanghong

DOI: https://doi.org/10.11817/j.issn.1672-7207.2017.11.038

2017-01-01

Abstract:Pressure wave and aerodynamic forces induced by two trains with different streamlined lengths and section lines passing each other in open air were investigated using the three-dimensional, compressible N-S equations,k-ε turbulence model and slip grid method. The results show that the peak-to-peak value of head wave from the present numerical method is in good agreement with that of the full-scale experiment, and the relative error is 4.9%. The peak-to-peak values of pressure waves, lateral forces and rolling moments are reduced by 27.0%, 39.2% and 36.2%, respectively, as the streamlined length increases from 8 m to 12 m. For the main profiles of the train head, the horizontal section profile contributes most to the aerodynamic performance when two trains passes. When the slope of horizontal section profile increases from 0.076 to 0.184, the peak-to-peak values of pressure wave, lateral forces, rolling moments are severally increased by 12.1%, 7.3% and 8.5%,respectively. The influence of longitudinal profile on the train aerodynamic performance is relatively small. As the slope of longitudinal profile increases from 0.505 to 0.713, these peak-to-peak values are increased by 1.90%, 0.65% and 0.89%, respectively. When the slope of cross section profile increases from 0.194 to 0.235, these peak-to-peak values are increased by 4.1%, 3.1% and 4.0%, respectively.