Abstract:Current flexible/compliant tactile sensors suffer from low sensitivity and high hysteresis introduced by the essential viscosity characteristic of soft material, either used as compliant sensing element or as flexible coverage. To overcome these disadvantages, this paper focuses on developing a tactile sensor with a smart hybrid structure to obtain comprehensive properties in terms of size, compliance, robustness and pressure sensing ability so as to meet the requirements of limited space applications such as prosthetic fingertips. Employing micro-fabricated tiny silicon-based pressure die as the sensing element, it is easy to have both small size and good mechanical performance. To protect it from potential damage and maintain the compliant surface, a rigid base and a soft layer form a sealed chamber and encapsulate the fixed die together with fluid. The fluid serves as highly efficient pressure propagation media of mechanical stimulus from the compliant skin to the pressure die without any hazard impacting the vulnerable connecting wires. To understand the pressure transmission mechanism, a simplified and concise analytic model of a spring system is proposed. Using easy fabrication technologies, a prototype of a 3 x 3 sensor array with total dimensions of 14mm x 14mm x 6.5mm was developed. Based on the quasi-linear relationship between fluid volume and pressure, finite element modeling was developed to analyze the chamber deformation and pressure output of the sensor cell. Experimental tests of the sensor prototype were implemented. The results showed that the sensor cell had good sensing performance with sensitivity of 19.9 mV N-1, linearity of 0.998, repeatability error of 3.41%, and hysteresis error of 3.34%. The force sensing range was from 5 mN to 1.6 N.

Dynamic perception mechanism of finger tactility under pneumatic multi-point loading

Experiment Research and Analysis on Pneumatic Point Tactile Display

A User-Friendly Packaging Solution for Silicon-Based Pressure Die to Develop Prosthetic Tactile Sensing

Experiment and Analysis on Line and Surface Tactile Display Based on Pneumatic Nozzle

Investigation of Mechanical Responses to the Tactile Perception of Surfaces with Different Textures Using the Finite Element Method

Experiment of Finger Deformation by Pneumatic Nozzle

Experimental Study of Finger Nonlinear Response under Dynamic Loading

Smart structure with elastomeric contact surface for prosthetic fingertip sensitivity development

A Flexible Tactile Sensor Array Based On Pressure Conductive Rubber For Three-Axis Force And Slip Detection

Three-dimensional finite element simulations of the mechanical response of the fingertip to static and dynamic compressions

Perception of Static and Dynamic Forces with a Bio-inspired Tactile Fingertip

A Flexible Tactile Sensor Array Based on Pressure Conductive Rubber for Contact Force Measurement and Slip Detection

Experiment and Modelling of Texture and Sliding Direction Dependence on Finger Friction Behavior

A Multi-Layer Stacked Microfluidic Tactile Display with High Spatial Resolution.

Fingerprint-inspired Dual-mode Pressure Sensor for Robotic Static and Dynamic Perception

The Research And Development Of Tactile Biomechanics On Human Fingertip

Influence of different fluid environments on tactile perception and finger friction

Anisotropic Vibration Tactile Model and Human Factor Analysis for a Piezoelectric Tactile Feedback Device

Design and Characterisation of Multi-cavity, Fluidic Haptic Feedback System for Mechano-tactile Feedback

Minimalist Design for Multi-Dimensional Pressure-Sensing and Feedback Glove with Variable Perception Communication

Tactile Perception of Roughness and Hardness to Discriminate Materials by Friction-Induced Vibration