Abstract:Since 2002, ultra wideband (UWB) technology has ignited the interests of academia and industry for its potential of achieving high-speed wireless communication in short distance with low power. It is actively investigated today due to the wide available bandwidth for very high data rate up to 480Mb/s and low power service over short distances in 10m range. According to FCC (Federal Communications Commission), the frequency spectrum allocated for UWB is 3.1-10.6 GHz, and the spectrum shape of modulated output power and maximum power level are limited to -41.3dBm/MHz, which ensures that UWB can coexist with existing spectrum users like GSM(Global System of Mobile communication), WLAN(Wireless Local Area Network) and Bluetooth. Based on MB-OFDM(Multi-Band Orthogonal Frequency Division Multiplexing), WiMedia released the initial version of Physical Layer (PHY) Specification in September 2005. In this proposal, the UWB frequency spectrum from 3.1 GHz to 10.6 GHz is divided into 14 channels with 528MHz for each channel. These sub-bands are grouped into five band groups. It is seen that by increasing the signal bandwidth significantly, ultra-wideband achieves a high channel capacity and becomes an attractive solution to the ever-increasing data rate demands in wireless personal area networks (WPAN). In December 2005, European Computer Manufacturer's Association (ECMA) proposed the standard ECMA 368/369 on high-speed UWB physics layer and media access control layer based on MBOFDM scheme. This has pushed the industrialization of UWB technology to a new stage again. In China, UWB technology has also become a hot topic according to the issue of the UWB standard by Chinese Government in 2008. A new UWB scheme named dual carrierorthogonal frequency division multiplexing (DC-OFDM ) has been proposed and applied in China. In China standard, only the band from 6.2GHz to 9.4GHz and the band from 4.2GHz to 4.8GHz are available for UWB applications. These bands are partitioned into 14 subbands of 264MHz bandwidth which means the bandwidth is halved in China’s DC-OFDM standard compared with the ECMA 368/369 standard. Thus the sampling frequency of the DACs(Digital-to-Analog Converter) and ADCs(Analog-to-Digital Converter) are halved too. The power consumption of the system can be reduced greatly. Moreover, in DC-OFDM

UWB Communication Systems Based on Adaptive Modulated MIMO-OFDM

Dynamic Spatial Subchannel Allocation with Adaptive Beamforming for MIMO/OFDM Systems

Power allocation for multi-band OFDM UWB communication networks

Adaptive subchannel allocation and antenna selection in MIMO-OFDM system

Synchronization and Channel Estimation for MB-OFDM Based UWB Systems

Multi-Antenna Adaptive OFDM System

Performance Analysis Of Multi-User Uwb Wireless Communication Systems

Multiple Access for UWB Wireless Sensor Network System

3 A 0 . 13 Um CMOS 6-9 GHz 9-Bands Double-Carrier OFDM Transceiver for Ultra Wideband Applications

Performance of Adaptive Subchannel Assignment-Based MIMO/OFDM Systems over Multipath Fading Channels

Performance Analysis and Enhancement of Multiband OFDM for UWB Communications

Frequency Synchronization in Baseband-Frequency-hopping Based MB-OFDM-UWB Systems

A Novel Modulation Diversity Assisted Ultrawideband Communication System

Design and Implementation of a MIMO-OFDM Wireless Communication System

Performance Comparison of Multi-band UWB-OFDM System Between Two Different Modulation Techniques

Multiuser Polar Coding based Multiple Access Interference Suppression Method for UWB Indoor Communication Systems

A Novel Time-Frequency Coded Multi-rate MB-OFDM UWB System Model

Dynamic sub-channel allocation with adaptive beamforming for broadband OFDM wireless systems

M-ary modulation schemes of UWB communication system based on orthogonal Hermite pulses

An Enhanced Link Adaptation for the MB-OFDM UWB System

Transmit Power Allocation among PSWF-based Pulse Wavelets in Cognitive UWB Radio