The CAD of Regulation System by State-Feedback Based on Symbolic Object Functions

吕志民,刘洋,吕劲

DOI: https://doi.org/10.3321/j.issn:0529-6579.2002.02.007

2002-01-01

Abstract:With using the symbolic object functions in MATLAB symbolic math toolbox,a CAD method of regulation system by state-feedback is presented. The result shows it is a correct and pratical methot.

What problem does this paper attempt to address?

The CAD of State-Feedback Regulation System Based on Prediction Observer

吕志民,吕劲,刘洋

DOI: https://doi.org/10.3321/j.issn:0529-6579.2002.03.008

2002-01-01

Abstract:A CAD method of state_feedback regulation system based on prediction observer is presented by using the relational functions in MATLAB control system toolbox and symbolic math toolbox. The theoretical calculation values are the same in comparison with the simulation data, and the result shows that it is a correct and practical method.
The CAD of State-Feedback Regulation System Based on Current Observer

田庆,吕志民

DOI: https://doi.org/10.3969/j.issn.1008-0686.2004.05.017

2004-01-01

Abstract:A CAD method of state-feedback regulation system based on current observer is presented by using the relational functions in MATLAB control system toolbox and symbolic math toolbox. The theoretical calculation values are the same in comparison with the simulation data, and the result shows that this method is correct and practical.
The CAD of State-Feedback Control System with an Integrator Based on Predicted State Observer

Bi-xia HE,Zhi-min L(U)

DOI: https://doi.org/10.3321/j.issn:0529-6579.2007.z2.049

2007-01-01

Abstract:A CAD method of state-feedback control system with an integrator and based on predicted state observer is presented by using the relational functions in MATLAB control system toolbox and symbolic math toolbox.The sampled data of state variables to theoretical calculation are approximately equal to simulation testing,and the result shows that recommended method in this paper is correct and applied.
The CAD of an Observer:State Feedback Control System with Feed-Forward Input

Feng Wang,Zhimin Lv

2010-01-01

Abstract:The CAD of an observer-state feedback control system with feed-forward input involves the solving of matrix equations with symbolic variables and finding its general solution is difficult, most of the literature at home and abroad can only be used recursive method to making his first few samples. In this paper, by using the relational functions in MATLAB symbolic math toolbox, the matrix operation with symbolic variables can be performed and the general solution of equations can accurately be obtained. The whole process of system design is automatically completed by pre-programmed M-files. Simulation results show that the proposed design method and solving process is correct.
Design of Robust Regulators for Nonlinear Systems with A Class of Unmatched Uncertainties

Xudong Ye

1995-01-01

Abstract:The paper addresses the state regutation Problem of nonlinear Systems with a C18ss Of unmatChed uncertaintics.A robust regulstor derived via a Lyapunov-based approach is proposed. The regulated state is uniformly bounded and it can enter and stay in a given arbitrarily small neighborhnd of origin within a finite time interval.
Study on Solution and Stability of the Linear Control System Based on Matlab

金祥曙,周晓军

DOI: https://doi.org/10.3969/j.issn.1006-0316.2002.05.017

2002-01-01

Abstract:Matlab language is getting widely appreciated in the international control field because of its strong matrix operation capacity and perfect visibility function,It can make some research work convenient,quick and efficient,The article worked over a hydraulic servo system based on the Matlab Platform
The Routh Stability Criterion and Its Application Based on Symbolic Math Toolbox

吕劲,吕志民

DOI: https://doi.org/10.3969/j.issn.1008-0686.2004.01.013

2004-01-01

Abstract:The stability criterion of discrete systems is an important part in the analysis and design of the computer control system. While Routh stability criterion for continuous systems used in discrete system, the z plane has to be converted into the w plane by bilinear transform. A CAD method is presented in this paper, the calculating process are achieved automatically using symbolic math toolbox on MATLAB. Two special cases that the elements are zero on the first column of Routh table are discussed detailedly and found out a solution. This paper discusses the application of Routh criterion, the numerical range of system variable is confirmed by parameter account and ensured the system into stable state. The result compare shows that this method is correct.
Design and Implementation of Embedded Finite State Machines in CAD Systems

LV Yun-hua,ZHANG San-yuan,YE Xiu-zi

DOI: https://doi.org/10.3969/j.issn.1002-6886.2006.03.012

2006-01-01

Abstract:Finite state machine is needed in nearly all the CAD system. switch,case clause are used to design the corresponding statechart diagrams in normal CAD systems. But it can easily cause logical confusion and it is difficult for developers to design and test the modules of the statemachine. To some extent,it will prevent us from synactic developing. A normal finite state machine can be designed just as draw a statechart diagrams with the machine class mentioned in the paper,and with lesslogical confusion. The nested state machine based on the normal state machine allows synatic developing and module testing, it can improve the efficiency of development.
Observer-Based Robust Decentralized Stabilization for a Class of Uncertain Interconnected Time-Delay Systems

刘晓志,李华,井元伟,张嗣瀛

DOI: https://doi.org/10.3321/j.issn:1005-3026.2004.06.001

2004-01-01

Abstract:The robust decentralized stabilization based on observer was discussed on a class of uncertain interconnected time-delay systems of which the time-varying parameter uncertainties are unknown and norm-bounded. The delayed terms are found in all the system state, control input and interconnection terms. Based on Lyapunov stability theory and linear matrix inequality (LMI) technique, a decentralized output feedback controller is designed such that the closed loop large-scale interconnected system is asymptotically stable with a sufficient condition for the stability derived in terms of LMIs. The simulation is given to illustrate the validity of the proposed methods.
Simulation of Precision Flow Control System Based on MATLAB/Simulink

LI Yupeng,WANG Xuanyin

DOI: https://doi.org/10.3969/j.issn.1001-3881.2011.11.030

2011-01-01

Abstract:Compared with the traditional hydraulic regulating speed system,variable-frequency regulating speed technology,applied in hydraulic system,brings more advantages.A variable-frequency regulating hydraulic simulative system was designed based on Matlab/Simulink.The simulation emphasis focused on the vector control regulating speed system of asynchronous motor.Simulation curves show that using the closed-loop vector control method,the system has better dynamic performance.
Application of Object-oriented Technology to the Design of Regulator Simulation Software

ZHANG Wei-jing,YANG Jian,LI Sheng-jun,CHANG Guang-hui

DOI: https://doi.org/10.3969/j.issn.1006-9348.2006.11.007

2006-01-01

Abstract:Using Chinese Windows 2000 as its operation system,the object-oriented technology has been utilized to design simulation software of a super-high-pressure regulator.Through Visual C++6.0 the software has been carried out.Owing to the superiority of object-oriented technology,the functions are all modularized,which makes the program easily maintained,modified and extended.Because of the nonlinearity of the mathematical models,Runge-Kutta calculation method for recalculating the coefficient of state equation each step is exploited.Using resources of Windows 2000,the visual design of software interface has been done,and display of simulation data has been implemented in both text and graph.The comparison between the simulation and test result shows that the precision of this simulation software is satisfactory.Compared with the traditional software,this software is of better interface and convenience.
Modeling and Emulation of Matlab in a DC Speed Regulating System

何颖,鹿蕾,赵争鸣

DOI: https://doi.org/10.3969/j.issn.1004-373x.2004.23.032

2004-01-01

Abstract:With the development of the computer, more and mo re systems using the techno logy of emulation. The author analyzes the modeling and emulation methods in PI D control and fuzzy control, then compares them in this paper.
Study on Computer Automatic Modelling and Simulation of Hydraulic System

GAO Qinhe,WANG Sunan

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.12.071

2006-01-01

Abstract:The realization methods of automatic modelling and simulation for hydraulic system dynamic behavior analysis were studied.The graphic symbol library and the parameter values database for hydraulic components were built under AutoCAD,for the purpose of computer-aided schematic diagram drawing,hydraulic components model selecting and parameter values assigning automatically.Automatic analysis program of topological structure for hydraulic schematic diagram was designed to extract the parameter values and connection between components in a hydraulic system schematic diagram and build the data file.Simulation model library for(hydraulic) components was constructed in Simulink.Based on the data file and simulation model library,the simulation model of hydraulic system can be constructed easily and parameter values assigning and simulation computing can be finished automatically.
A Synthesis Approach of Constrained Robust Regulation Based-on Partial Closed-Loop Optimization

BC Ding,HH Tang,P Huang,P Yang

DOI: https://doi.org/10.1109/icmlc.2004.1380696

2004-01-01

Abstract:A new approach to the constrained robust regulation for systems with a polytopic description is proposed. This is motivated by two previous techniques. One parameterizes the infinite horizon control moves into a look-up table of state-feedback-law-sequence. The other splits the infinite horizon control moves into a set of free control moves over a fixed horizon and a state feedback law in the terminal region. The basic idea in the paper is to utilize the look-up table in deciding the free control moves. Thus, open-loop optimization is substituted by partial closed-loop optimization. A simulation example shows the closed-loop stability of the new technique.
Application of MATLAB SISO Tool in Praxis Teaching of Mechatronics Control Technology

GUO Qing,JIANG Dan,LI Hui

DOI: https://doi.org/10.3969/j.issn.1672-4550.2018.02.014

2018-01-01

Abstract:In the practical teaching of mechatronical control technology,the closed-loop control law design of mechatronical object model is difficult to be understood by students.In this paper,a valve control of hydraulic cylinder construction with feedback control loop is constructed by MATLAB SISO(single input single output)tool.Furthermore,the PI control law form and the corresponding control parameters are optimally designed.Through the intuitive data of step response and the simulation result of the stable margin in frequency domain,students can achieve deep comprehension of mechatronics plant model,PI control law design and stability of feedback control loop.The idea proposed in this study can inspire students’ learning interests and improve the capability of practical innovation.
Symbolic Abstractions for Nonlinear Control Systems via Feedback Refinement Relation

Wei Ren,Dimos V. Dimarogonas

DOI: https://doi.org/10.1016/j.automatica.2020.108828

2020-11-25

Abstract:This paper studies the construction of symbolic abstractions for nonlinear control systems via feedback refinement relation. Both the delay-free and time-delay cases are addressed. For the delay-free case, to reduce the computational complexity, we propose a new approximation approach for the state and input sets based on a static quantizer, and then a novel symbolic model is constructed such that the original system and the symbolic model satisfy the feedback refinement relation. For the time-delay case, both static and dynamic quantizers are combined to approximate the state and input sets. This leads to a novel dynamic symbolic model for time-delay control systems, and a feedback refinement relation is established between the original system and the symbolic model. Finally, a numerical example is presented to illustrate the obtained results.

Systems and Control
Robust Output Regulation for a Class of Nonlinear Systems in Output Feedback Form

陈作贤,季海波,何德峰

2008-01-01

Journal of University of Science and Technology of China

Abstract:The robust output regulation problem was analyzed for a class of nonlinear systems in output feedback form with unknown nonlinearities.Compared with the classic internal model design,besides information of the exosystem and the plant,stabilizing functions generated from the stabilization process are also used to construct the internal model in the presence of system unknown nonlinearities.The presented backstepping algorithm can regulate the output to any prescribed accuracy while maintaining uniform ultimate boundedness of overall signals.The simulation shows the effectiveness of the proposed control algorithm.
Integrated Design Method for Control System Based on Matlab/RTW

刘思久,孙莹,赵蔚,张礼勇

DOI: https://doi.org/10.3969/j.issn.1007-2683.2004.05.010

2004-01-01

Abstract:In order to reduce the design period and the develop ment cost of control system, this paper discusses a new method which can accomplish the whole design process rapidly by a powerful tool of MathWorks. It introduces the basic function of MATLAB/Simulink/RTW, explains the design procedure in details. It also takes a weapon control system as an example, by means of xPC target simulation system, and illustrates some key points of this method in the practice working process.
Adaptive Optimal Stabilization Regulation of Continuous-Time Systems via Virtual System and Measurement Feedback

Youqing Wang,Li Liang,Zhongyang Wang

DOI: https://doi.org/10.1109/CAC59555.2023.10450653

2023-11-17

Abstract:This study presents a novel technique to solve stabilizing regulation for continuous-time systems via adaptive/approximate dynamic programming. To be more precise, first, a new virtual system is created to replace the existing one. Then, the state and state differential virtual values are created by an observer utilizing the output and input virtual values. To develop the controller based on data-driven, we take into account the value iteration approach. Compared with existing adaptive dynamic programming methods, the method proposed in this study does not require integral operation and observation of all states. Finally, a simulation example concludes by demonstrating the algorithm's usefulness.

Engineering
Development of CAD System for Water Conservancy Project with AutoCAD

张洪明,张立翔,杨红宣,吴思鹏

DOI: https://doi.org/10.3969/j.issn.1003-0158.2004.04.027

2004-01-01

Abstract:The CAD system is developed with Visual C++ 6.0 in the form of dynamic link libraries. The development environment is ObjectARX. It is according to the rule of “Drawing standard of water resources and hydroelectric engineering” (SL 73.l-6—95). It includes functions of setting the drawing environment, generating legend, filling up patterns for water conservancy projects, plotting the landform contours, managing the graphic library and generating list of material. It is embedded with AutoCAD 2000. It shares the address space with AutoCAD and directly calls the commands of AutoCAD. It works in with AutoCAD to make designers raise their work efficiency.

The CAD of Regulation System by State-Feedback Based on Symbolic Object Functions

The CAD of State-Feedback Regulation System Based on Prediction Observer

The CAD of State-Feedback Regulation System Based on Current Observer

The CAD of State-Feedback Control System with an Integrator Based on Predicted State Observer

The CAD of an Observer:State Feedback Control System with Feed-Forward Input

Design of Robust Regulators for Nonlinear Systems with A Class of Unmatched Uncertainties

Study on Solution and Stability of the Linear Control System Based on Matlab

The Routh Stability Criterion and Its Application Based on Symbolic Math Toolbox

Design and Implementation of Embedded Finite State Machines in CAD Systems

Observer-Based Robust Decentralized Stabilization for a Class of Uncertain Interconnected Time-Delay Systems

Simulation of Precision Flow Control System Based on MATLAB/Simulink

Application of Object-oriented Technology to the Design of Regulator Simulation Software

Modeling and Emulation of Matlab in a DC Speed Regulating System

Study on Computer Automatic Modelling and Simulation of Hydraulic System

A Synthesis Approach of Constrained Robust Regulation Based-on Partial Closed-Loop Optimization

Application of MATLAB SISO Tool in Praxis Teaching of Mechatronics Control Technology

Symbolic Abstractions for Nonlinear Control Systems via Feedback Refinement Relation

Robust Output Regulation for a Class of Nonlinear Systems in Output Feedback Form

Integrated Design Method for Control System Based on Matlab/RTW

Adaptive Optimal Stabilization Regulation of Continuous-Time Systems via Virtual System and Measurement Feedback

Development of CAD System for Water Conservancy Project with AutoCAD