Abstract:When the ship is sailing in the sea,the static and dynamic loads acting on the independent type C tank transfers to the hull only through two saddles,and interactions in saddle area will bring high nonlinear char-acteristics to FEM research.In this paper,wood was modeled as solid elements,a series of interactions,con-straints and contacts were defined in ABAQUS,and nonlinear analysis method was used to reasonably simulate the nonlinear mechanical property and deformation feature of saddle area.Based on the difference of model range,two kinds of finite element methods of independent type C tanks were introduced:“Tank+Wood”model-ing method and “Tank+Wood+Hull”modeling method.The influence of the hull girder deformation in the ex-treme load case on tank strength were analyzed numerically through a calculation and it was shown that the hull girder deformation had a certain influence on tank strength,but tank strength depended basically on the local loads;the boundary effects on stresses results of tank structures in saddle area could be eliminated if ship struc-tures were considered in calculation model,and the stress level of this area was 3. 7%~16. 5% lower than the method ignoring the influence of ship structures.The numerical analysis results can be used for reference to choose an appropriate nonlinear tank analysis method in engineering practices.

Nonlinear finite element analysis of independent type C tanks considering hull-tank contact