Abstract:Ethylene-propylene-diene monomer (EPDM) is a key engineering material; its mechanical characterization is important for the safe use of the material. In this paper, the coupled effects of thermal degradation temperature and time on the tensile mechanical behavior of EPDM rubber were investigated. The tensile stress-strain curves of the aged and unaged EPDM rubber show strong nonlinearity, demonstrating especially rapid stiffening as the strain increases under small deformation. The popular Mooney–Rivlin and Ogden (N = 3) models were chosen to fit the test data, and the results indicate that neither of the classical models can accurately describe the tensile mechanical behavior of this rubber. Six hyperelastic constitutive models, which are excellent for rubber with highly nonlinearity, were employed, and their abilities to reproduce the stress-strain curve of the unaged EPDM were assessed. Finally, the Davis–De–Thomas model was found to be an appropriate hyperelastic model for EPDM rubber. A Dakin-type kinetic relationship was employed to describe the relationships between the model parameters and aging temperature and time, and, combined with the Arrhenius law, a thermal aging constitutive model for EPDM rubber was established. The ability of the proposed model was checked by independent testing data. In the moderate strain range of 200%, the errors remained below 10%. The maximum errors of the prediction results at 85 °C for 4 days and 100 °C for 2 and 4 days were computed to be 17.06%, 17.51% and 19.77%, respectively. This work develops a theoretical approach to predicting the mechanical behavior of rubber material that has suffered thermal aging; this approach is helpful in determining the safe long-term use of the material.

Microcosmic Structure and Mechanics Performance of EPDM Rubber in Hot-Oxygen Aging

Study on aging of EPDM use for outdoor insulation

Ageing behaviour and molecular/network structure evolution of EPDM/carbon black composites under compression and in thermal-oxidative environments

Preparation and Properties of High Heat Resistance EPDM Composite

The effect of UV radiation ageing on the structure, mechanical and gas permeability performances of ethylene–propylene–diene rubber

Aging Research of Ethylene-propylene-diene Monomer (EPDM) Rubber

Effect Of Thermo-Oxidative Aging On Mechanical Properties And Tribological Behaviors Of Acrylonitrile-Butadiene Rubber

Flame Retardant, Mechanical, and Hot Air Aging Properties of Ethylene‐propylene‐diene Monomer/ammonium Polyphosphate/nano‐silic Composite Rubber

Constitutive Model for Thermal-Oxygen-Aged EPDM Rubber Based on the Arrhenius Law

Investigation on the Thermal Oxidative Aging Mechanism and Lifetime Prediction of Butyl Rubber

Thermal Oxidation Ageing Effects on Silicone Rubber Sealing Performance

Experimental Evaluation of Aging Characteristics of EPDM As a Sealant for Undersea Shield Tunnels

Aging Behavior and Thermal Degradation of Fluoroelastomer Reactive Blends with Poly-Phenol Hydroxy Epdm

Enhanced thermo-oxidative aging resistance of EPDM at high temperature by using synergistic antioxidants

Thermo‐oxidative Aging in Surface Layer of Cis‐1,4‐polybutadiene Vulcanizates

Influence of different antioxidants on cure kinetics and aging behaviours of ethylene propylene diene rubber/low density polyethylene blends

Relationships Between Thermo-Oxidation and Dynamic Rheological Behavior of Epdm

The Deterioration of Foamed Silicone Rubber in Humid and Hot Environments

Accelerated thermal ageing studies of polydimethylsiloxane (PDMS) rubber

The Compatibility of C6F12O/CO2 gas mixture with sealing rubber materials and the effect of O2

Thermal Degradation and Thermo-oxidative Aging Behavior of Vinylidene Fluoride-Containing Fluoroether Rubber