Abstract:Injection dynamics in engine common rail systems influence cycle fuel injection rate and mass, and further the combustion and emissions features. We therefore experimentally studied the hydraulic dynamic behaviors on a common rail injection system under changed two-stage injection strategies and then constructed an artificial neural network to predict these hydraulic dynamic behaviors. The injector inlet pressure dynamics were firstly measured with changed injection pressure and then associated with the test conditions in both time and frequency domain. Further, an artificial neural network model was constructed and trained to predict the hydraulic dynamic features at different test conditions, with the trial-and-error method used to identify an appropriate neural network configuration. The sensitivity of the injection hydraulic dynamics to the injection parameters was also evaluated. It is found that the injection pressure places a more significant influence on the pressure fluctuation amplitudes than injection dwell time and pilot injection energizing time, particularly on the minimum injector inlet pressures. With elevated injection pressure, an increase in pilot injection energizing time causes an increased fluctuation amplitude under most injection dwell times. The time intervals between the maximum/minimum injector inlet pressures during the pilot and main injections increase with injection dwell time and decrease with extended pilot injection energizing time. The pressure fluctuation amplitudes in the frequency domain are sensitive to the injection dwell times. The constructed back propagation neural network with an optimized configuration shows good prediction capability, and the sensitivity analysis results on injector inlet pressure are consistent with those obtained experimentally.

Study on Injection Timing MAP Based on Neural Network

On the Use of Artificial Neural Networks to Model the Performance and Emissions of a Heavy-Duty Natural Gas Spark Ignition Engine

Injection control algorithm of diesel electronic control system based on neural network technology

Hydraulic Dynamics in Split Fuel Injection on a Common Rail System and Their Artificial Neural Network Prediction

Application of Neural Network in the Study of Combustion Rate of Natural Gas/diesel Dual Fuel Engine.

Pressure-Based Approach to Estimating the Injection Start and End in Single and Split Common Rail Injection Processes

Manifold absolute pressure estimation using neural network with hybrid training algorithm

High Pressure Common Rail Diesel Engine Modeling for Calibration and Optimization

The Research On Real-Time Fault Diagnostic Method Of Engine Embedded By Ga Optimization And Bp Neural Networks

Simulation of the Effect of Fuel Injection Rate that Matches Fuel Injection Advanced Angle on the Performance of Ultra High Pressure Common Rail Diesel Engine

Prediction of the Injection Quality Based on CAE and BP Neural Network

Study of Multiple-Injection Coordinate Control Strategy for GD-1 Diesel Engine

Predicting the Nitrogen Oxides Emissions of a Diesel Engine using Neural Networks

Study on Control-Oriented Emission Predictions of PPCI Diesel Engine with Two-Stage Fuel Injection

Injection control algorithm for an electronic unit-pump

Neural Network Control on Low-Pressure Injection System of Rapid Tooling

Experimental study on combustion noise control of diesel engine with pilot injection

Application of BP Neural Network to Fault Diagnosis of High-Pressure Common Rail Fuel System of Electronic Control Diesel Engines

Regression prediction of hydrogen enriched compressed natural gas (HCNG) engine performance based on improved particle swarm optimization back propagation neural network method (IMPSO-BPNN)

Simulation and Prediction of Injection Parameters Based on Artificial Neural Network

Research on Injection Pulse Width Calibration of Gasoline Engine by Uniform Design