Abstract:The four-wheel steering (4WS) has been studied for a long time. And many control algorithms, such as proportional control, optimal control, sliding-mode control and H2/H∞ control, have been applied to it. However, few works expand those control algorithms to four-axle vehicle. The traditional four-axle vehicle can be steerable in the first and the second axle, which is called double-front-axle-steering (DFAS) vehicle. By adding Electro-hydraulic Power Steering System to the third and the forth axles, the DFAS vehicle becomes an all-wheel steering (AWS) vehicle. Some control algorithms could apply to it to control the steering angles of the third and the forth axle like the application to 4WS vehicle to control the rear wheel steer. In fact, due to the large size and high center of mass, reducing steer radius and enhancing stability through all-wheel steering is more important than the application in two-axle vehicle. In the paper, a sliding mode controller (SMC) to control the steering angles of the third axle and forth axle is proposed for a four-axle vehicle to improve handling and stability. In order to design the SMC, a linear all-wheel steering model of four-axle vehicle is established firstly, which considers the tire cornering stiffness perturbation and the crosswind disturbance. The yaw rate and sideslip angle are considered as two important state variables for this model. Then a reference model which contains an ideal yaw rate and zero-sideslip angle is developed. Finally, the switching function of the SMC is chosen based on the error of state variable between the all-wheel steering model and the reference model. The SMC aims to make the all-wheel steering model track the reference model through controlling the steering angles of the third and the fourth axle. Unfortunately, in this control strategy, adverse-phase steering appears between the third and the fourth axle, causing serious tire wear problem. So a modified sliding mode controller is given, which is a compromise between controller performance and tire wear. In order to investigate the effect of the modified controller, two typical tests, double lane change test and crosswind disturbance test, are carried out through numerical simulation. The controller built in Matlab/Simulink, and a high precision four-axle vehicle mode developed in TruckSim make two tests easily to accomplish co-simulation of driver-controller-vehicle close-loop system. The simulation results show that the modified SMC has robustness to vehicle parameter perturbation and insensitivity to crosswind disturbance. Moreover, all-wheel steering four-axle vehicle has better handling performance and stability compared with traditional DFAS vehicle.

Four-Wheel-Steering/Driving Sliding Mode Control Based on Direct Yaw Moment

Sliding-Mode Control Of Four Wheel Steering Systems

A Study on Coordination of Direct Yaw Moment Control and Variable Wheel Slip Control for Vehicle Stability

Four-wheel steering with total sliding mode control

Research of Automobile Stability System with Four Wheel Steering by Variable Structure Control with Sliding Mode

An Integrated Algorithm For Vehicle Stability Improvement With The Coordination Of Direct Yaw Moment And Four-Wheel Steering Control

Control Effect Analysis of Control Factors for Rear Wheel Steer Angle of Four-wheel-steering-vehicle

Sliding Mode Control for All-Wheel Steering of Four-Axle Vehicle

Sliding-mode robust control for 4WS vehicle based on non-linear characteristic

Study on Stability Control of 4wd Ev Based on Sliding Mode Control

Research on Straight Line Stability Control Strategy of Four Wheel Drive Vehicle Based on the Sliding Mode Variable Structure Control and Optimization Algorithm

A Sliding Mode Control Scheme for Steering Flexibility and Stability in All-wheel-steering Multi-axle Vehicles

Fuzzy and Sliding Mode Variable Structure Control of Vehicle Active Steering System

The Analysis of Four-Wheel-Steering-Vehicle Based on Linear-Quadratic(LQ)Optimal Control Theory

Integrated Control System Design of Active Front Wheel Steering and Four Wheel Torque to Improve Vehicle Handling and Stability

A Novel Control Strategy of Straight-line Driving Stability for 4WID Electric Vehicles Based on Sliding Mode Control*

Stability Control for a Four-Motor-Wheel Drive Electric Vehicle Based on Sliding Mode Control

Research on the All-Wheel Steering Control Strategy for Multi-Axle Vehicles Based on Super-Twisting Sliding Mode Control

Steering Stability Control for the Four In-Wheel Motor Independent-Drive Vehicle Based on the Optimal Control

Four Wheel Independent Drive Electric Vehicle Lateral Stability Control Strategy.