Abstract:A solvent recycling reflux extraction process for Panax notoginseng was optimized using a design space approach to improve the batch-to-batch consistency of the extract. Saponin yields, total saponin purity, and pigment yield were defined as the process critical quality attributes (CQAs). Ethanol content, extraction time, and the ratio of the recycling ethanol flow rate and initial solvent volume in the extraction tank (RES) were identified as the critical process parameters (CPPs) via quantitative risk assessment. Box-Behnken design experiments were performed. Quadratic models between CPPs and process CQAs were developed, with determination coefficients higher than 0.88. As the ethanol concentration decreases, saponin yields first increase and then decrease. A longer extraction time leads to higher yields of the ginsenosides Rb-1 and Rd. The total saponin purity increases as the ethanol concentration increases. The pigment yield increases as the ethanol concentration decreases or extraction time increases. The design space was calculated using a Monte-Carlo simulation method with an acceptable probability of 0.90. Normal operation ranges to attain process CQA criteria with a probability of more than 0.914 are recommended as follows: ethanol content of 79-82%, extraction time of 6.1-7.1 h, and RES of 0.039-0.040 min(-1). Most of the results of the verification experiments agreed well with the predictions. The verification experiment results showed that the selection of proper operating ethanol content, extraction time, and RES within the design space can ensure that the CQA criteria are met.

Optimization of ethanol reflux extraction of phenylethanoid glycosides from Semen Plantaginis with Response surface technique

Optimization of Process Parameters of Extraction of Amentoflavone, Quercetin and Ginkgetin from Taxus Chinensis Using Supercritical CO2 Plus Co-Solvent.

Optimization of Extraction Technology for Total Flavones from Metasequoia by Response Surface Methodology

Optimization for the Ethanol Precipitation Process of Botanical Injection: Indicator Selection and Factor Influences

Optimization Of The Ethanol Recycling Reflux Extraction Process For Saponins Using A Design Space Approach

Extraction Condition Optimizing Of Poly (3-Hydroxybutyric Acid) From Microorganism Using Response Surface Methodology

[Optimization of ethanol reflux extraction process of Ziziphi Spinosae Semen- Schisandrae Sphenantherae Fructus based on network pharmacology combined with response surface methodology]

Optimization of membrane dispersion ethanol precipitation process with a set of temperature control improved equipment.

Optimization of Extraction of Phenolic Compounds from Scum Using Response Surface Methodology

Optimization of Flavonoids Extraction from Anoectochilus Roxburghii by Response Surface Methodology

Optimization of Fermentation Process, Extraction and Separation of Chaetoglobosin A

Optimizing the Alcohol Precipitation of Danshen by Response Surface Methodology

Optimization for Extraction of Proanthocyanidins from Grape Seeds Using Response Surface Method

Optimization of ultrasonic-assisted ethanol extraction of polyphenols from Phyllanthus emblica by response surface methodology

Optimization of Extraction of Linarin from Flos Chrysanthemi Indici by Response Surface Methodology and Artificial Neural Network

Optimization of Technology for Microwave-Assisted Extraction of Soybean Embryo Flavonoids Using Box-Behnken Response Surface Analysis

Application of Pharmacodynamics-Based Optimization to the Extraction of Bioactive Compounds from Chansu

Optimisation of Ethanol-Reflux Extraction of Saponins from Steamed Panax notoginseng by Response Surface Methodology and Evaluation of Hematopoiesis Effect

Optimization of Ultrasound-assisted Extraction of Phenolic Compounds from Sugarcane Skin by Response Surface Methodology

Optimum extraction process of polyphenols from the bark of Phyllanthus emblica L. based on the response surface methodology.

Optimization of Extraction of Flavonoids from Pteris multifida by Response Surface Methodology