Abstract:Gas atomization is utilized to produce good-quality metal powders. A numerical modeling framework is developed to simulate the gas atomization process. A two-phase VOF flow model in OpenFOAM is applied to track the primary breakup of the melt stream by a high-speed gas flow. The generation of primary melt droplets is extracted from the VOF field. A Lagrangian-Eulerian multiphase flow model in Ansys Fluent is adopted to track the secondary breakup of the primary melt droplets under the high-speed gas flow. The final particle size distribution is obtained by analyzing the particles sampled at the outlet of the atomization chamber. The process of gas atomization can be affected by many factors such as the atomization equipment, operating parameters, and material properties. Sensitivity analysis is conducted through modeling to investigate the effects of these factors on particle size distribution. The model predictions are validated by specially designed gas-atomization experiments. Significance and novelty A CFD-based numerical modeling framework is developed to simulate the gas atomization process, including both the primary breakup of the melt stream by a high-pressured inert gas flow jet and the secondary breakup of the melt droplets generated after the primary breakup stage inside the atomization chamber using different models. They are integrated within the modeling framework to consider the comprehensive flow physics in the gas atomization process. A gas atomization test for Nickel-Silicon alloys is designed and performed. The particle size distribution of the powders produced in the gas atomization test is used to validate the model predictions. Good agreement between the model predictions and experimental observations shows the success of the modeling framework. In addition, a systematic sensitivity analysis is performed through simulations to investigate the effects of various operating parameters on the particle size distribution of the powders produced by gas atomization.

Parameter Optimization of Atomization Extracting

Implementation of Parameter Estimation in Mechanistic Models by Dynamic Optimization

Testing research on ZD model atomization characteristic of high viscosity liquid

Influence of Vanadium Extraction Converter Process Optimization on Vanadium Extraction Effect

Optimization of atomization performance of external mixing air atomizing nozzle based on response surface agent model

Predictive Models for Characterizing the Atomization Process in Pyrolysis of Methyl Ricinoleate

Numerical Models For Viscoelastic Liquid Atomization Spray

VOF method for impinging-jet atomizers

An Improved Dynamic Model of the Vanadium Extraction Process in Steelmaking Converters

Multi-objective parameters optimization design of self-excited oscillation pulsed atomizing nozzle

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

An Atomization Model of Air Spraying Using the Volume-of-Fluid Method and Large Eddy Simulation

Prediction model of volume average diameter and analysis of atomization characteristics in electrostatic atomization minimum quantity lubrication

Experimental and Numerical Simulation Studies on the Atomization Characteristics of the Internal Mixing Nozzle and Its Field Application

Parameters optimization of the parallel and series mode ultrasonic atomizer on the ammonia-water absorption system

A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys

3D numerical modeling of gas atomization process for powder preparation based on similarity theory

Investigation on High-Viscosity Chemical Waste Liquid Atomizer Based on VOF-DPM

INFLUENCE OF STRUCTURAL DIMENSIONS UPON THE ATOMIZING PERFORMANCE OF A PREFILMING SPRAY NOZZLE

Experimental analysis of spray behavior and lubrication performance under twin-fluid atomization

Spinning disk atomization: Theory of the ligament regime