Abstract:Enhancing the entrainment capability of particles by bubbles is pivotal for facilitating particle elutriation and augmenting reaction efficiency in gas–liquid-solid systems. The current work utilizes the volume of fluid method in conjunction with discrete element method (VOF-DEM) to study particle entrainment in gas–liquid-solid three-phase reactors featuring different gas inlet layouts. Following model validation, this study delves into the multiphase flow characteristics and particle behaviors in detail. The results reveal that the merging of adjacent channels leads to the formation of larger combined bubbles, thereby increasing particle force, velocity and entrainment height. The average entrainment height during the merging of adjacent bubble channels is 42% higher compared to the four-channel configuration. However, this amalgamation diminishes the channel count and particle entrainment count. Specifically, the highest particle entrainment occurs in the two-channel configuration, which is 26% greater than that in the adjacent-channel merging configuration. Conversely, increasing the channel number decreases bubble size and overall particle entrainment capacity. With consistent bubble sizes, an increase in particle entrainment is associated with reduced entrainment height, indicative of diminished momentum transfer from bubble wakes to individual particles. Additionally, maintaining an optimal number of channels ensures high gas inlet velocity and bubble size, thereby enhancing particle entrainment efficiency. Lastly, appropriately reducing channel distance fosters interaction between adjacent channels, resulting in a meandering bubble path that further promotes particle entrainment and elution efficiency. The results obtained from this study serve as a useful reference for the design and optimization of similar systems.

Liquid Entrainment in Slurry Bubble Column Reactor

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

An Axial Dispersion Model for Evaporating Bubble Column Reactor

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Three-Phase Liquid-Gas-Solid Flows in a Bubble Column

Gas-Liquid Mass Transfer in A Slurry Bubble Column Reactor under High Temperature and High Pressure

Slurry Reactors For Gas-To-Liquid Processes: A Review

VOF-DEM study of particle entrainment behaviors in the gas–solid-liquid system with multi-inlet configuration

Impacts of solid physical properties on the performances of a slurry external airlift loop reactor integrating mixing and separation

2D and 3d Simulations of Fluid Dynamics in the Bubble Reactor for Liquid Fuel Synthesis: Comparisons Against Experiments

Hydrodynamic performance and structural optimization of a slurry bubble column with vertical tube internals

Passive Control of Gas–liquid Flow in a Separator Unit Using an Apertured Baffle in a Parallel-Flow Condenser

Effect of Particles on Hydrodynamics and Mass Transfer in a Slurry Bubble Column: Correlation of Experimental Data

Gas-Liquid Mass Transfer in Microbubble Column Reactors

Experimental study and modeling on liquid dispersion in external-loop airlift slurry reactors

Hydrodynamics and mass transfer in a slurry external airlift loop reactor integrating mixing and separation

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion