Adsorption and Fenton-Like Degradation of Naphthalene Dye Intermediate on Sewage Sludge Derived Porous Carbon
Lin Gu,Nanwen Zhu,Huaqing Guo,Shouqiang Huang,Ziyang Lou,Haiping Yuan
DOI: https://doi.org/10.1016/j.jhazmat.2012.12.012
IF: 13.6
2013-01-01
Journal of Hazardous Materials
Abstract:A sewage sludge derived porous carbon (SC), which was prepared by physicochemical activation and carbonization (600°C), was applied for the adsorption and degradation of 1-diazo-2-naphthol-4-sulfonic acid (1,2,4-Acid) in the presence of H2O2 and the performance was compared to that of pure Fe3O4 magnetic nanoparticles (MNPs). The prepared SC showed mesoporous structure with magnetic property, which made it favorable for solid–liquid separation application. Further experiments revealed that SC had a higher adsorption capacity and degradation efficiency of 1,2,4-Acid than bare Fe3O4. The Langmuir and Freundlich model fitted the isotherm data and illustrated that the equilibrium adsorption amount of 1,2,4-Acid onto SC (95.1mgg−1) was quadruple as large as that on Fe3O4 (26.4mgg−1). The subsequent degradation experiments were conducted at conditions (pH 5.0 in the presence of 15mM H2O2) with regard to 1,2,4-Acid degradation efficiency and metal ions leach. The 120min's treatment in SC/H2O2 system achieved 94% of 1,2,4-Acid (from 150mgL−1 after adsorption equilibrium to 9mgL−1) and 48.1% TOC reduction, far higher than the efficiency of 46% and 24.3% by using Fe3O4 MNPs. Further analysis evidenced the co-catalytic effect of iron, carbon, silicon and aluminum, which existed in large quantities in sludge derived SC. The carbonaceous phase along with silica contributes to an increase in the dispersion of catalytic centers and an adsorbent to concentrate organic pollutant whereas the iron oxide as well as alumina provides the catalytic centers for a Haber–Weiss initiated reactions.