Abstract:A high fidelity RANS Solver coupling the reliable transition prediction model and a practical optimizer with high efficiency and reliability are two key issues in the design of the natural laminar flow wings. This paper aims at developing a practical tool for the laminar flow wing’s optimization design by combining the above mentioned two issues. Firstly, a NTS/NCF transition prediction method based on the linear stability theory is coupled to the in-house three-dimensional RANS solver for improving the simulation precision of the solver. By solving the three dimensional linear stability equations, the NTS which corresponds to the Tollmien-Schlichting instability is integrated with the envelope strategy, and the NCF which corresponds to the crossflow instability is integrated with the fixed β strategy. With the transition N factors NTS and NCF being determined according to the experimental data, a Reynolds-Averaged Navier-Stokes solver with the functionality of automatic laminar-turbulent transition prediction is developed. Secondly, combined with the optimization method based on the Kriging surrogate model and the genetic algorithm, an optimization method for the laminar flow wings’ optimization design is developed. Finally, with the developed method, the drag minimization of a baseline natural laminar flow (NLF) wing by changing the wing planform with the constraints of wing’s area keeping nearly constant and lift being not decreased is studied. The results show that the drag coefficient is decreased by 4.47%, and the area of laminar flow on the wing surface is enlarged. This shows that the method in this paper can be effectively applied to the aerodynamic design of natural laminar flow wing.

Transition prediction methods towards significant drag reduction via laminar flow technology

Transition Prediction and Sensitivity Analysis for a Natural Laminar Flow Wing Glove Flight Experiment

Automatic transition prediction for wing-body configurations using dual eN method

A Transition Prediction Method for Flow over Airfoils Based on High-Order Dynamic Mode Decomposition

The Drag Reduction Design For Transonic Airfoil With Consideration Of Laminar Transition

A novel method for automatic transition prediction of flows overairfoils based on dynamic mode decomposition

Laminar flow wing ’ s optimization design by rans solver with automatic transition prediction

Simulations of the Viscous Flow around Swept Wings and Optimization Design Using the RANS Solver with Automatic Transition Prediction

Transition Study of 3D Aerodynamic Configures Using Improved Transport Equations Modeling

Transition Prediction for Hybrid Laminar Flow Control Flight Test Considering Geometric Uncertainties

Drag Reduction by Laminar Flow Control

Transition Prediction of High-Lift Wing

Research of transition criterion for semi-empirical prediction method at specified transonic regime

Study on Numerical Method for Flow Transition Prediction Based on Turbulence Model

Numerical Investigation on the Transition Flow around NLF Airfoil

Aerodynamic Performance and Transition Prediction of Low-Speed Fixed-Wing Unmanned Aerial Vehicles in Full Configuration Based on Improved Γ − Re Model

Laminar Transition over Airfoil: Numerical Simulation of Turbulence Models and Experiment Validation

Study of Boundary Layer Transition on Supercritical Natural Laminar Flow Wing at High Reynolds Number Through Wind Tunnel Experiment

Aerodynamic Design of Transonic Natural-Laminar-Flow (NLF) Wing Via Surrogate-basedGlobal Optimization

RANS Simulation with Transition Prediction Method on Airfoil Flows with Laminar Separation Bubbles

A Surrogate-Based En Method for Compressible Boundary-Layer Transition Prediction