Abstract:Noise reduction is an important development direction for aircrafts and wind turbines. Owl wings have three unique morphological characteristics (leading-edge serrations, trailing-edge serrations and velvet-like surfaces) that effectively suppress aerodynamic noise in low Reynolds numbers. Among them, trailing-edge serrations are widely considered the most effective noise-reduction method. Although different serrations have been studied, the quantitative relationship and influence mechanism between the serration shape, wavelength and amplitude are poorly understood. The acoustic characteristics of asymmetrical aerofoils with different trailing-edge serrations have not been fully studied. This work investigates the flow characteristics and acoustic scattering mechanisms of novel owl-based aerofoils with different trailing-edge serrations. A sensitivity analysis is utilized to quantitatively investigate the influence and interaction mechanisms of the shape, wavelength and amplitude in trailing-edge noise reduction. Numerical simulations of the transient flow over the aerofoil are performed via the large eddy simulation method, and the acoustic far-field is obtained by solving the Ffowcs Williams and Hawkings equation. The results indicate that the sawtooth and sinusoidal serrations provide the most significant noise reduction effects; the maximum noise reduction is 8.74 dB. The wavelength and amplitude play similar roles, but the amplitude has relatively greater influence. For the sawtooth and sinusoidal serrations, the large-scale vortex structures are broken into many small-scale spiral vortex structures due to the presence of the sharp serration tip. The serrations can effectively reduce the coherence of the turbulent fluctuations due to spanwise variations in the edge and may be the main reason for noise suppression. The original owl-based aerofoil generates more low-frequency noise and less high-frequency noise than aerofoils with trailing-edge serrations. The peak noise frequencies of all aerofoils are approximately 400 Hz; hence, low-frequency noise is a dominant influence in noise generation. Furthermore, the acoustic sources generated by transient pressure fluctuations are mainly located on the serration root.

Effect of Geometry Variations on Tandem Airfoil Interaction Noise

Aeroacoustic investigation of multi-directional wings aligned in tandem under wing-in-ground effect

Effect of geometric parameters on the noise generated by rod-airfoil configuration

An Experimental Study of Noise Generated by Tandem Blades

Effect of different geometries of self-oscillating trailing-edge flaplets on aerofoil self-noise

Effects of trailing-edge serration shape on airfoil noise reduction with zero incidence angle

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

An Analysis on the Flow Field Structures and the Aerodynamic Noise of Airfoils with Serrated Trailing Edges Based on Embedded Large Eddy Flow Simulations

CAA simulations of the leading edge noise of a heaving airfoil

Utilization of Whale-inspired Leading-edge Tubercles for Airfoil Noise Reduction

Numerical study of flow and noise predictions for tandem cylinders using incompressible improved delayed detached eddy simulation combined with acoustic perturbation equations

An Analytical Correction to Amiet’s Solution of Airfoil Leading-Edge Noise in Non-Uniform Mean Flows

Direct Numerical Simulation of Tandem-Wing Aerodynamic Interactions at Low Reynolds Number

Analysis of wavy leading-edge noise reduction and source mechanism in rod-airfoil interactions

Active control of airfoil turbulent boundary layer noise with trailing-edge blowing

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Numerical Analysis of Broadband Noise Generated by an Airfoil with Spanwise-Varying Leading Edges

Effect of trailing-edge serrations on noise reduction in a coupled bionic aerofoil inspired by barn owls

Noise Reduction in Wind Turbine Airfoils with Serrated Trailing Edges: An Experimental Study in Low Turbulence Wind Tunnel

Morphological effects of leading-edge serrations on the acoustic signatures of mixed flow fan

The noise-generating mechanism of rod-airfoil configuration and the effect of spanwise length on noise prediction