Abstract:It is of great significance to evaluate the cratering performances of concrete target subjected to steel projectile impacting. Different from the method proposed by Forrestal et al. (2003) to record the acceleration signals in steel projectile by single-channel acceleration data recorder, a new testing equipment is established in the present study to record the dynamic triaxial responses of concrete target by six lateral bars. The projectile impacts the target through a hollow square bar (one of six lateral bars), and the true triaxial confinements are applied on the target through six lateral bars which loaded by three servo-controlled cylinders. These three forces, i.e. end resistance, lateral reaming resistance, and lateral traction, acted on the projectile toe during cratering process are discussed respectively by wave signal εy- recorded on the left bar in y-axial, by wave signals εx+, εx-, εz+ , and εz- recorded on the lateral bars, and by specially assigned strain gauges demonstrated in Appendix B. Series of experiments of concrete targets under various impact velocities and under various confinements are conducted accordingly. Two stages, e.g. the accelerating cratering stage, and the decelerating cratering and penetration stage, are observed in stress σ y- profiles. Similar lateral reaming stages are observed in stress profiles of lateral bars. These stress profiles could be used to evaluate forces applied on projectile toe, and lateral tractions could be ignored. Comparing with the cratering process in the impact direction, there are about 10µs delaying for the lateral reaming process. Depth of crater and pulse duration decrease with increasing confinements, and they exhibit obvious velocity and confinement dependency. Three dimensionless factors, i.e. the inertial effect, the strength effect, and the deformation characteristics, are introduced to evaluate the crater depth. Strength of concrete target is proven to be the most important factor in the cratering process for concrete target under lower impact velocity. This work provides comprehensive and profound understanding of the effects of multiaxial confinement on the crater resistance for concrete-like materials.

Penetration performance of concrete under triaxial stress

Dynamic Compression Behaviors of Concrete under True Triaxial Confinement: an Experimental Technique

Behavior of Concrete Under the Triaxial Compression

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

DYNAMIC STRENGTH AND DEFORMATION OF CONCRETE IN TRIAXIAL STRESS STATES

Dynamic Properties of Plain Concrete in Triaxial Stress State

Behavior of Concrete in Water Subjected to Dynamic Triaxial Compression

Dynamic Behavior of Concrete under Static Triaxial Loading Using 3D-Hopkinson Bar

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Experimental investigation of rigid confinement effects of radial strain on dynamic mechanical properties and failure modes of concrete

Experimental Study on the Uniaxial Dynamic Compression Properties of Concrete

Mechanical properties of high-performance concrete under triaxial compression

Study on the Dynamic Mechanical Properties of Ultrahigh-Performance Concrete under Triaxial Constraints

Influence of Stress State on Dynamic Behaviors of Concrete under True Triaxial Confinements

Study of the Behavior of Concrete under Triaxial Compression

Dynamic Biaxial Compressive Strength and Fracture Pattern of Concrete with Constant Confining Pressure

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

The cratering performance of concrete target under true triaxial confinements

Biaxial Behaviour Of Plain Concrete Subjected To Dynamic Compression With Constant Lateral Stress

Mechanical Behaviour of Air-Entrained Concrete

Numerical study of the influences of pressure confinement on high-speed impact tests of dynamic material properties of concrete