Abstract:<p>In this study, a finite cyclic elasto-plastic constitutive model is developed to simulate the cyclic hardening and softening of the low-yield-point steel BLY160. Compared with existing models, an improved description of the stress-strain hysteresis loops is achieved by introducing a modified Chaboche kinematic hardening rule and a nonlinear isotropic hardening rule extended with a strain memory surface. In the proposed kinematic hardening rule, the backstress is decomposed into three parts for short, middle, and long ranges, with each of them obeying an Armstrong-Frederick (A-F) evolution rule consisting of a linear hardening and dynamic recovery term. To incorporate the significant effect of the kinematic hardening rule on the shape change in hysteresis loops, a dynamic recovery coefficient is postulated herein to develop with not only the accumulated plastic strain but also the memorized strain range. In addition, a hardening factor is introduced to the linear hardening term to consider the different plastic moduli of monotonic and cyclic deformations. The model parameters are identified in an exquisite manner by discriminating the contributions of the isotropic and kinematic components to the cyclic hardening and softening phenomena, which is implemented through a quantitative evaluation of the tested hysteresis loops. The comparison between the numerical prediction and experimental results indicates that the developed constitutive model can elaborately simulate the cyclic behaviour of the investigated steel. The results demonstrate that the entire evolution process of the stress-strain hysteresis curve characterized by the cyclic hardening and softening, transient Bauschinger effect, and strain-range dependence can be adequately described by the proposed model.</p>

Study on Endochronic Theory of Non-Proportional Cyclic Plasticity

A Non-proportional Cyclic Plasticity Model Taking into Account Internal Structural Tensor

An Endochronic Constitutive Model for Rate-Dependent and Nonproportional Cyclic Plasticity

Constitutive modelling of nonproportional cyclic plasticity

Cyclic deformation of 316L stainless steel and constitutive modeling under non-proportional variable loading path

A Simple Inelastic Constitutive Model for Evaluation of Stable Cyclic Stress Response under Nonproportional Straining

On the properties of plastic flow of material under nonproportional cyclic loading

A constitutive model of cyclic plasticity with Lode dependence for structural steels

Visco-plastic constitutive modeling on Ohno–Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel

An Integral Non-Proportional Cyclic Plasticity Model Taking into Account Path Dependences

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model.

Constitutive model for cyclic behavior of mild steel under various strain amplitudes

Non-saturated Cyclic Softening and Uniaxial Ratcheting of a High-Strength Steel: Experiments and Viscoplastic Constitutive Modeling

Development of Combined Hardening Model for the Metal Material under Cyclic Loading

An improved elasto-plastic constitutive model for the exquisite description of stress-strain hysteresis loops with cyclic hardening and softening effects

A visco–plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature

A DISCUSSION OF PLASTICITY MODULUS UNDER NONPROPORTIONAL CYCLIC LOADING

Continuous Modeling of the Transient and Steady Cyclic Hardening /Softening Behavior of Metallic Materials under Amplitude Change Loading

Stabilized cyclic stress‐strain calculation for metals under multiaxial loading

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Coupling Effects of Finite Rotation and Strain-Induced Anisotropy on Monotonic and Cyclic Failure of Metals