Abstract:OBJECTIVE:To establish a 3D printing system for bone tissue engineering scaffold fabrication based on the principle of fused deposition modeling, and to evaluate the controllability over macro and micro structure precision of polylactide (PLA) and polycaprolactone (PCL) scaffolds. METHODS:The system was composed of the elements mixture-I bioprinter and its supporting slicing software which generated printing control code in the G code file format. With a diameter of 0.3 mm, the nozzle of the bioprinter was controlled by a triaxial stepper motor and extruded melting material. In this study, a 10 mm×10 mm×2 mm cuboid CAD model was designed in the image ware software and saved as STL file. The file was imported into the slicing software and the internal structure was designed in a pattern of cuboid pore uniform distribution, with a layer thickness of 0.2 mm. Then the data were exported as Gcode file and ready for printing. Both polylactic acid (PLA) and polycaprolactone (PCL) filaments were used to print the cuboid parts and each material was printed 10 times repeatedly. After natural cooling, the PLA and PCL scaffolds were removed from the platform and the macro dimensions of each one were measured using a vernier caliper. Three scaffolds of each material were randomly selected and scanned by a 3D measurement laser microscope. Measurements of thediameter of struts and the size of pores both in the interlayer overlapping area and non-interlayer overlapping area were taken. RESULTS:The pores in the printed PLA and PCL scaffolds were regular and interconnected. The printed PLA scaffolds were 9.950 (0.020) mm long, 9.950 (0.003) mm wide and 1.970 (0.023) mm high, while the PCL scaffolds were 9.845 (0.025) mm long, 9.845 (0.045) mm wide and 1.950 (0.043) mm high. The struts of both the PLA and PCL parts became wider inthe interlayer overlapping area, and the former was more obvious. The difference between the designed size and the printed size was greatest in the pore size of the PLA scaffolds in interlayer overlapping area [(274.09 ± 8.35) μm)], which was 26.91 μm. However, it satisfied the requirements for research application. CONCLUSION:The self-established 3D printing system for bone tissue engineering scaffold can be used to print PLA and PCL porous scaffolds. The controllability of this system over macro and micro structure can meet the precision requirements for research application.

OCT-Based Improvement of Geometrical Controllability of 3D-Bioprinted Porous Hydrogel Scaffolds

Projection-based 3D Bioprinting for Hydrogel Scaffold Manufacturing

Digital Light Processing-Based 3D Printing of Cell-Seeding Hydrogel Scaffolds with Regionally Varied Stiffness

Research on the Printability of Hydrogels in 3D Bioprinting.

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

Holographic Display-Based Control for High-Accuracy Photolithography of Cellular Micro-Scaffold with Heterogeneous Architecture

Digital light processing printed hydrogel scaffolds with adjustable modulus

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

Holographic Feedback Controlled Micro-Stereolithography for Constructing Microstructures with Tuned Mechanical Property

Design of a High Precision Multichannel 3D Bioprinter

Design and optimization of 3D-bioprinted cell-laden scaffolds in dynamic culture

In situ defect detection and feedback control with three-dimensional extrusion-based bioprinter-associated optical coherence tomography

Modulation of Cell Behavior by 3D Biocompatible Hydrogel Microscaffolds with Precise Configuration

Artificial Intelligence‐Assisted High‐Throughput Screening of Printing Conditions of Hydrogel Architectures for Accelerated Diabetic Wound Healing

Accurate Modulation of Photoprinting under Stiffness Imaging Feedback for Engineering ECMs with High-Fidelity Mechanical Properties

3D printing of porous alginate/gelatin hydrogel scaffolds and their mechanical property characterization

[Establishment of a 3D Printing System for Bone Tissue Engineering Scaffold Fabrication and the Evaluation of Its Controllability over Macro and Micro Structure Precision].

Preparation of cellulose nanocrystal/oxidized dextran/gelatin (CNC/OD/GEL) hydrogels and fabrication of a CNC/OD/GEL scaffold by 3D printing

Direct 3D Printed Biomimetic Scaffolds Based on Hydrogel Microparticles for Cell Spheroid Growth

Automated Fabrication of the High-Fidelity Cellular Micro-Scaffold Through Proportion-Corrective Control of the Photocuring Process.

Deformation Monitoring and Stress Distribution Prediction of 3D-Printed Hydroxyapatite Scaffolds