Abstract:The rotor unbalance is a major source of rotor vibrations. Rotor vibrations often produce many undesired effects like noise, wear and fatigue, etc. In this paper, we try to seek the benchmark solutions for the unbalance responses of complex rotor-bearing system. The presented approach could be seen as the extension of transfer matrix method (TMM) in some sense. For the TMM, a disk or supporting structure cut off one uniform shaft element into two and someone must use the compatibility condition between these two new elements to derive the transitive matrix. However, for the presented approach, it directly solves the governing equations of uniform shaft elements with consideration of the effects of disks and supporting structures. Thus, this analytical approach is advantageous in reducing the times of matrix multiplication between state matrices and field matrices. One only needs to calculate the inversion of 16 × 16 dynamic stiffness matrix to find the steady state response. It saves the computer memory and is easy to be programmed. In addition, this analytical approach avoids the problems of selecting optimal discretization mesh densities in the case of FEM applications. For arbitrary linear boundary condition, the benchmark solutions are always easy to be obtained. The numerical simulation is carried out and two numerical examples are given to validate the new solutions. In which the finite element method is used as the numerical approach. Simulation results show that the benchmark solutions match very well with the FEM results. The effects of anisotropy in the supporting structures on the rotor's dynamic behavior, which are observed in this work, are also in accordance with many references. This validates the benchmark solutions further.

TRANSIENT DYNAMIC BALANCING OF ROTOR SYSTEM WITH PARAMETER UNCERTAINTIES

Rigid Rotor Dynamic Balancing with the Influence Coefficient Method

Rigid Rotor Dynamic Balancing by Two-Plane Correction with the Influence Coefficient Method

Nonparametric Modeling on Random Uncertainty and Reliability Analysis of a Dual-Span Rotor

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Nonparametric Modeling and Vibration Analysis of Uncertain Jeffcott Rotor with Disc Offset

Dynamic Response Analysis of a Shaft-Disk-drum Rotor System with Interval Uncertainties

On-line Unbalance Identification of Flexible Rotor System

Dynamic Analysis of Parametrically Excited System under Uncertainties and Multi-Frequency Excitations

Nonlinear responses of a dual-rotor system with rub-impact fault subject to interval uncertain parameters

Response Analysis Of A Linear Rotor-Bearing System Under Combined Non-Stationary Seismic And Harmonic Excitations

Dynamic Response Analysis of a Magnetically Suspended Dual-Rotor System Considering the Uncertainty of Interference-Fit Value

Dynamic Analysis of Geared Rotor System with Hybrid Uncertainties

Benchmark solutions for the dynamic analysis of general rotor-bearing system with arbitrary linear boundary conditions

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Stochastic finite element analysis using polynomial chaos on a flexible rotor with contact nonlinearity

Stochastic Unbalance Response Characteristics of Rotor Systems Based on Intrusive Spectral Stochastic Finite Element Method

DYNAMIC ANALYSIS OF FLEXIBLE ROTOR SYSTEMS SUBJECTED TO TIME-VARYING BASE EXCITATIONS

Dynamic balancing of super-critical rotating structures using slow-speed data via parametric excitation

Vibration Response Characteristics of a Dual-Rotor with Unbalance-Misalignment Coupling Faults: Theoretical Analysis and Experimental Study

Balancing of flexible rotors without trial weights based on finite element modal analysis