Abstract:Rotor unbalance and rub-impact are major concerns in rotating machinery. In order to study the dynamic characteristics of these machinery faults, a dual-disc rotor system capable of describing the mechanical vibration resulting from multi-unbalances and multi-fixed-point rub-impact faults is formulated using Euler beam element. The Lankarani–Nikravesh model is used to describe the nonlinear impact forces between discs and casing convex points, and the Coulomb model is applied to simulate the frictional characteristics. To predict the moment of rub-impact happening, a linear interpolation method is carried out in the numerical simulation. The coupling equations are numerically solved using a combination of the linear interpolation method and the Runge–Kutta method. Then, the dynamic behaviours of the rotor system are analysed by the bifurcation diagram, whirl orbit, Poincaré map and spectrum plot. The effects of rotating speed, phase difference of unbalances, convex point of casing and initial clearance on the responses are investigated in detail. The numerical results reveal that a variety of motion types are found, such as periodic, multi-periodic and quasi-periodic motions. Moreover, the energy transfer between the compressor disc and the turbine disc occurs in the multi-fixed-point rubbing faults. Compared with the parameters of the turbine disc, those of the compressor disc can affect the motion of the rotor system more significantly. That is, the responses exhibit simple 1T-periodic motion in the wide range of rotating speed under the conditions of sharp convex point and larger initial clearance. These forms of dynamic characteristics can be effectively used to diagnose the fixed-point rub-impact faults.

FLEXURAL-TORSIONAL VIBRATION ANALYSIS OF A DOUBLE-DISK ROTOR CAUSED BY THERMAL EXPANSION INDUCED AXIAL MOVEMENT

Analysis of Flexural and Torsional Vibration for Turbogenerator Shafts on Power Impact

Axial Displacement and Rubbing Vibration of Rotor System Caused by Thermal Expansion

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Model verification and vibration analysis of the four-disk hollow flexible shaft rotor system

General dynamic model of aeroengine's rotor system during maneuvering flight

Vibration analysis of a dual-rotor-bearing-double casing system with pedestal looseness and multi-stage turbine blade-casing rub

Vibration Response Analysis of Rubbing Faults on a Dual-Rotor Bearing System

Prediction of Dynamic Characteristics of A Dual-Rotor System with Fixed Point Rubbing-Theoretical Analysis and Experimental Study

Response Analysis of a Dual-Disc Rotor System with Multi-Unbalances–multi-fixed-point Rubbing Faults

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Analysis on Axial Displacements of an Engine Main Shaft in Complex Temperature Environments

Dynamic Load and Thermal Coupled Analysis for the Inter-Shaft Bearing in a Dual-Rotor System

Dynamics analysis and experiment research of vibration response for dual-rotor system under rubbing fault

Simulation of Rotor'S Axial Rub-Impact in Full Degrees of Freedom

External and internal coupling effects of rotor's bending and torsional vibrations under unbalances

Coupled Bending and Torsional Vibration of a Rotor System with Nonlinear Friction

DYNAMIC ANALYSIS OF FLEXIBLE ROTOR SYSTEMS SUBJECTED TO TIME-VARYING BASE EXCITATIONS

A Unified Modeling Approach for Rotating Flexible Shaft-Disk Systems with General Boundary and Coupling Conditions

Nonlinear dynamic characteristics induced by inter-shaft rub-impact in a counter-rotational dual-rotor system of aeroengine

Detailed deduction and analysis of the general analytical model of coupling vibration in a rotor system