Abstract:Under different ambient temperatures, the thermal aberration certainly affects the imaging quality of infrared multi-spectral camera. Therefore, an athermalized model of infrared multi-spectral cameras is established, and in this model the ambient infrared multispectral camera is equivalent to a separated dual-lens optical system. In the case of the fixed focal length, the influence of the back focal length on the change of the focal power of the front lens and back lens is analyzed. Now, the variation range of the front and rear lens interval is assumed to be restricted. When the back focal length is smaller than the focal length, the ratio of the absolute value of the focal power of the front lens to the absolute value of the focal power of the back lens decreases with the back focal length increasing. The material of the front lens and the back lens have a longer interval on the thermogram. When the back focal length is greater than the focal length, the scenario becomes exactly opposite. Combined with the judgment method of the positive value and negative value of the focal power on the thermogram, the selection range of materials is constrained by the positive value, negative value, and absolute value of focal power, thus realizing the rapid selection of the optical materials. This method is used to design an athermalized infrared multispectral camera with a waveband of 8–14 μm, a focal length of 50 mm, and an F number of 1.4 in a range from –40 ℃ to +60 ℃. Through the simulation analysis, the value of the athermalized infrared multispectral camera, at the Nyquist frequency of 30 lp/mm reaches 0.39, which is close to the diffraction limit; the root mean square radius of the diffuse spot is smaller than the Airy spot radius of 19.17 μm; the axial aberration is less than 0.02 mm, and the design results show that this method can make the long back-focus infrared optical system maintain stable imaging quality in a large temperature range. The SF6 gas is detected experimentally, and the experimental results demonstrate the excellent optical performance of the system.

Design of long-focal length athermal NIR TV optomechanical system

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of A Panoramic Long-Wave Infrared Athermal System

Design of Athermalized Wide-Angle Low-Distortion Lens Using Freeform Surface

Design of Infrared Hybrid Athermal Optical System

Influence of temperature on infrared optical system and athermal design

Design of Athermalization for Dual-Band Infrared Optical System Based on Harmanic Diffraction

High-performance compact athermal panoramic annular lens design with separated radial optical power

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of infrared dual field of view optical system with long focal length and high resolution

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Design of a Catadioptric Mid-Wave Infrared Telecentric Microscope with High Numerical Aperture and Long Working Distance

Optical Design of a Cooled Mid-Wave Infrared Off-Axis Three-Mirror System with a Low F-number and Wide Field of View

Aberration Athermal Design for Infrared Search and Trace Optical System

Analysis of Influence of Long Back Focal Length on Athermal Design Based on Infrared Multispectral Camera

Optical design of a visible/short-wave infrared common-aperture optical system with a long focal length and a wide field-of-view

Design and analysis of miniature high-resolution omnidirectional gaze optical imaging system

Design of a focusing system for micro-nano satellite remote sensing camera based on thermal control technology

Optimal design of optomechanical uncooled infrared focal plane array with integrated metalens

[Design and Study of Middle Infrared Spectrum System with Variational Field of View].