Abstract:Methane gas is mainly present in coal in two forms: free and adsorbed. There are a large number of closed pores inside the coal, which makes it difficult to measure the gas content of the coal. Therefore, studying the nanoscale closed pores of coal is of great importance for gas control. To study the pore structure characteristics of coal with different deformation degrees and to analyze the volume fraction of closed pores in coal, various coal samples were analyzed by the low-temperature liquid nitrogen adsorption method (LT-N2GA), the carbon dioxide adsorption method, and small-angle X-ray scattering (SAXS). The variation of parameters such as the pore size, pore volume, specific surface area, and degree of metamorphism was compared by using different methods to obtain the proportion of the closed pore volume of different coal samples. The results show that with the increase of the degree of coal metamorphism, the total pore volume and specific surface area of coal samples show a decreasing trend first and then an increasing trend, while the average pore diameter of coal samples gradually increases first and then decreases sharply. When the degree of deterioration of coal is low (volatile content > 20%), the closed pores of coal account for more than 48% of the open pores. When the degree of deterioration of coal samples is relatively high (volatile content <20%), the proportion of large pores in coal bodies decreased from 59.47 to 29.07%, and the proportion of pores in mesopores decreased from 12.15 to 11.09% and finally increased to 11.65%, and the proportion of micropore diameter increased from 28.38 to 59.28%. The volume fraction of the coal sample measured by the SAXS experiment shows that when the coal quality is high, the volume of the mesopores is large, which is consistent with the results of the low-temperature liquid nitrogen and CO2 adsorption experiments. Judging from the number of holes, the number of closed holes is 1 to 3 orders of magnitude greater than the number of open holes, and the number of closed holes of coal samples accounts for more than 94% of the total number of holes. It shows that the number of closed holes in the coal is far greater than the number of open holes, so the gas in the coal is mainly concentrated in the closed holes, and the formation of closed pores is partly because of the collapse of the internal structure and partly because of the volatilization of unstable substances. The research combined with LT-N2GA, the carbon dioxide adsorption method, and SAXS test methods can better analyze the number of closed pores of coal and characterize the nanopore fracture structure of coal. The novelties of this article are that this is a quantitative analysis performed using a scientific method of SAXS. The findings of this study can lead to a better understanding of the coal and gas outburst mechanism and the existence of gas to adopt better prevention measures.This article has not yet been cited by other publications.

The application of argon ion polishing-field emission scanning electron microscopy to the research on coal nanopores

An Atomic Force Microscopy Study of Coal Nanopore Structure

Characterization of the pore structure in Chinese anthracite coal using FIB-SEM tomography and deep learning-based segmentation

Nanoscale pore structure and mechanical property analysis of coal: An insight combining AFM and SEM images

Quantitative Characterization of Pore Structure Parameters in Coal Based on Image Processing and SEM Technology

Research on the Multiscale Microscopic Pore Structure of a Coalbed Methane Reservoir

Pore structure characterization of coal by synchrotron radiation nano-CT

Fractal Analysis and Classification of Pore Structures of High-Rank Coal in Qinshui Basin, China

The Characteristic Development of Micropores in Deep Coal and Its Relationship with Adsorption Capacity on the Eastern Margin of the Ordos Basin, China

Full-Scale Pore and Microfracture Characterization of Deep Coal Reservoirs: A Case Study of the Benxi Formation Coal in the Daning–Jixian Block, China

Fine Structure Characterization of Representative Coal-Bearing Rocks of the Late Carboniferous Taiyuan Formation in Huainan Coalfield: Combined SEM, FESEM, and μCT Techniques

Quantitative characterization of coal microstructure and visualization seepage of macropores using CT-based 3D reconstruction

Multiscale Fractal Characterization of Pore Structure for Coal in Different Rank Using Scanning Electron Microscopy and Mercury Intrusion Porosimetry

Nanopore Characteristics of Coal and Quantitative Analysis of Closed Holes in Coal

Detailed Characterization of Microscopic Pore Structure in Low-Rank Coal: A Case Study of Zhalainuoer Coalfield

Multiple scale pore size characterization of coal based on carbon dioxide and liquid nitrogen adsorption, high-pressure mercury intrusion and low field nuclear magnetic resonance

Three-Dimensional Pore Structure Characterization of Bituminous Coal and Its Relationship with Adsorption Capacity

Application of Small Angle X-ray Scattering in Evaluation of Pore Structure of Superfine Pulverized Coal/char

Experimental investigation on the fractal feature of pore-fracture systems in bituminous coal and its influencing factors

Nanoscale Quantitative Characterization of Microstructure Evolution of Partly Graphitized High Rank Coal: Evidence from AFM and HRTEM

Accurate characterization of coal pore and fissure structure based on CT 3D reconstruction and NMR