Abstract:Using biomass for partial replacement of coke breeze in iron-ore sintering process is an effective technique as a countermeasure against global warming. However, the sinter strength would be weakened due to the damaged heat pattern at high biomass proportion. In this paper, the gaseous fuel injection method was experimentally investigated with the aim at solving this problem. Eleven cases were arranged to examine the ultra-low concentration of methane combustion and its effect on the improvement of heat pattern at high charcoal proportion. The temperature in the sintering bed was recorded by both thermocouples and infrared thermography. The thermocouple data indicated that the melt quantity index was significantly increased by employing the gaseous fuel injection method. Moreover, the infrared images show that the red-hot region was expanded at each moment in the methane injection cases. The influencing mechanism of gaseous fuel injection on the heat pattern in sintering process was revealed in this paper. As the premixed methane/air approaching to the solid fuel combustion zone, it was preheated by the hot sintered ores, then ignited and self-sustained near the solid fuel combustion zone. A newly generated gaseous fuel combustion zone coupled with the solid fuel combustion zone was used to control the heat pattern in sintering bed. The results showed that the heat pattern and sinter strength kept increasing until the methane concentration increased to 0.4–0.5% under the lab conditions. The stable interval of secondary combustion zone in the sintering bed was also analyzed. Finally, comprehensively considering the sinter strength, yield, productivity and sintering time, the recommended equivalent methane concentration at high charcoal proportion was 0.5% where the shatter strength grew 3.78% and solid fuel rate reduced 7.52%, compared with 100% coke sintering case. Generally, the gaseous fuel injection offers a technical support for the iron ore sinter production using cheap or carbon neutral solid fuel. More importantly, this method can also reduce solid fuels (the main contributor of contamination dust during the production, transportation and storage) consumption by partial substitution of cleaner gaseous fuel.

Experimental Study of Gaseous Fuel Injection Method for Controlling Heat Pattern of Melting Zone in Iron Ore Sintering

Improvement of Heat Pattern and Sinter Strength at High Charcoal Proportion by Applying Ultra-Lean Gaseous Fuel Injection in Iron Ore Sintering Process

Optimization of Gaseous Fuel Injection for Saving Energy Consumption and Improving Imbalance of Heat Distribution in Iron Ore Sintering

Visualization Study on the Methane Segregation Injection Technology in Iron Ore Sintering Process

Study on Replacement of Coke With Charcoal and Methane in Iron-Ore Sintering

Application of a Clean Fuel Produced by Electrolysis in Iron Ore Sintering Process: Brown Gas Injection to Assist Sintering

New insights into the effects of methane and oxygen on heat/mass transfer in reactive porous media

EXPERIMENT STUDY ON THE EFFECT OF IRON ORE SINTER BEHAVIOR WITH ADDING BIOMASS

Application of steam injection in iron ore sintering: fuel combustion efficiency and CO emissions

CFD Prediction of Heat/mass Transfer in Multi-Layer Sintering Process Assisted with Gaseous Fuel Injection

Experiment research on utilization of particle biomass fuel in sintering process

Influence of Ammonia and Brown Gas Injection on the Iron Ore Sintering Characteristics under Biochar Substitution

Research on Performance Optimization of Biomass Fuel for Sintering

Effect of Ammonia Injection on the Iron Ore Sintering Process: Reducing Fossil Fuel Consumption and Carbon Emissions

Investigation on the application of by-product steam in iron ore sintering: performance and function mechanism

Experimental Study of Commercial Charcoal As Alternative Fuel for Coke Breeze in Iron Ore Sintering Process

Adaptability analysis of H 2 -rich gas injection and sintered ore performance with different raw material ratios

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

Numerical Analysis of Heat and Mass Transfer Coupled with Gaseous Fuel Injection in Reactive Porous Media

Study on Optimizing the Sintering Proportioning in Masteel

Calculation on effective heat of injected pulverized coal in blast furnace