Abstract:Swirling impinging jet (SIJ) is considered as an effective means to achieve uniform cooling at high heat transfer rates, and the complex flow structure and its mechanism of enhancing heat transfer have attracted much attention in recent years. The large eddy simulation (LES) technique is employed to analyze the flow fields of swirling and non-swirling impinging jet emanating from a hole with four spiral and straight grooves, respectively, at a relatively high Reynolds number (Re) of 16,000 and a small jet spacing of H/D = 2 on a concave surface with uniform heat flux. Firstly, this work analyzes two different sub-grid stress models, and LES with the wall-adapting local eddy-viscosity model (WALEM) is established for accurately predicting flow and heat transfer performance of SIJ on a flat surface. The complex flow field structures, spectral characteristics, time-averaged flow characteristics and heat transfer on the target surface for the swirling and non-swirling impinging jets are compared in detail using the established method. The results show that small-scale recirculation vortices near the wall change the nearby flow into an unstable microwave state, resulting in small-scale fluctuation of the local Nusselt number (Nu) of the wall. There is a stable recirculation vortex at the stagnation point of the target surface, and the axial and radial fluctuating speeds are consistent with the fluctuating wall temperature. With the increase in the radial radius away from the stagnation point, the main frequency of the fluctuation of wall temperature coincides with the main frequency of the fluctuation of radial fluctuating velocity at x/D = 0.5. Compared with 0° straight hole, 45° spiral hole has a larger fluctuating speed because of speed deflection, resulting in a larger turbulence intensity and a stronger air transport capacity. The heat transfer intensity of the 45° spiral hole on the target surface is slightly improved within 5–10%.

Large Eddy Simulation of a Round Jet From a Nozzle With Porous Inner Wall

Large Eddy Simulation of a Planar Jet Flow with Nanoparticle Coagulation

Noise Control for High Subsonic Jet Flows by Inner Wall Treatment

Numerical Simulations of Bubble Formation and Acoustic Characteristics from a Submerged Orifice: the Effects of Nozzle Wall Configurations

Large Eddy Simulation of Cavitation Jets from an Organ-Pipe Nozzle: The Influence of Cavitation on the Vortex Coherent Structure

Numerical Study on the Effect of a Lobed Nozzle on the Flow Characteristics of Submerged Exhaust

Numerical simulation of jet flow flied and its radiated acoustic field

Large Eddy Simulation of A Normally Impinging Round Air Jet with Heat Transfer at A Reynolds Number of 4400

Large eddy simulation of coherent structure of impinging jet

Numerical simulation of jet flow field and its radiated sound field

Les Of Normally Impinging Round Air-Jet With Heat Transfer At Moderate Reynolds Numbers

Far Field Noise Prediction Of Subsonic Hot And Cold Jets Using Large-Eddy Simulation

Numerical Study for Turbulent Flow of Drag and Flow Noise with Wavy Wall

Large-eddy Simulation of Sonic Coaxial Jets with Different Total Pressure Ratios of the Inner to Outer Nozzle

Large eddy simulation of a 3-D spatially developing turbulent round jet

Importance of the nozzle-exit boundary-layer state in subsonic turbulent jets

LARGE EDDY SIMULATION OF FLOW FIELD NEAR NOZZLE OF RECTANGULAR JET

Large Eddy Simulation of a High Reynolds Number Turbulent Jet in Crossflow

Experimental and numerical investigation on the cavitation erosion effect and resonance effect of submerged water jets

Large-Eddy Simulation Study of Flow and Heat Transfer in Swirling and Non-Swirling Impinging Jets on a Semi-Cylinder Concave Target

Large-eddy Simulation of Underexpanded Sonic Coaxial Jet