Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Research on dynamic characteristics simulation of moving-magnet double stators linear compressor

Dynamic Characteristics of Moving-Magnet Linear Compressor Based on Finite Element Method

Design and Test on Moving-Magnet Linear Compressor

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Modeling and analysis of moving-magnet linear motor with no inner-teeth for linear compressor

Research on Linear Motor for Linear Compressor

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Study on Force Characteristic of Moving Magnet-Iron Type Linear Oscillatory Actuator with Two Divided Stators

Research on a moving-magnet linear oscillatory actuator with double stators and its application

Design of Flat Moving Magnet Linear Compressor Based on Finite Element Analysis

Modeling and Analysis of a Novel Linear Oscillatory Motor With Two Divided Stators

Operating Characteristic Analysis of Linear Oscillatory Motor with Two Separated Stators

Novel Moving-Magnet Linear Oscillatory Motor with Two Divided Stators

Research on dynamic modeling and electromagnetic force centering of piston/piston rod system for labyrinth piston compressor

Modeling and Analysis of Moving-Magnet Transverse-Flux Linear Oscillatory Motor

Modeling and analysis of a novel integrated linear oscillatory compressor

Finite Element Analysis and Optimization for Magnetic Circuit System of Moving-Coil Linear Compressor

The Design of Excitation Coil for Moving-magnet Linear Compressor

Design of direct-drive air compressor drived by permanent magnet brushless DC motor

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Dynamic behavior analysis of a moving coil oil-free linear compressor in refrigeration system