Abstract:Atmospheric δ13C(CO2) high precision measurement was always based on mass spectroscopy technology,while the emerging isotope ratio infrared spectroscopy technology was rarely reported in domestic literatures.Compared to mass spectroscopy technology,the wavelength scanned cavity ringdown spectroscopy (WS-CRDS) and Fourier transform infrared spectroscopy (FTIR) can measure CO2 and its δ13C continuously in ambient conditions,and the operation was more simple and convenient,but always susceptible to environmental conditions.Thus,to insure international comparability and compatibility of data,the performance of the two systems and the three calibration strategies for δ13C measurement were compared in the study,respectively.As a result,both FTIR and WS-CRDS showed good performance for atmospheric CO2 concentration measurement,while for δ13C (CO2),FTIR displayed higher stability than G2201i.Calibration by standard gases can ensure accurate CO2 measurement by the two systems,the errors for tested cylinders were all within ±0.05 × 10-6,and the difference between CO2 results measured by the two systems was also within ± 0.05 × 10-6.After calibration by standard gases,the errors of δ13C values can be reduced obviously.The errors of δ13C values calibrated on FTIR were all within ± 0.1‰o using three different calibration strategies,and no obvious difference was found among the three calibration strategies.The errors of δ13C values calibrated on G2201i were within ±0.1‰ using the last two calibration strategies,while the errors of δ13C values calibrated on G2201i using the first calibration strategy were within ±0.1 ～0.2‰.

Evaluation of infrared spectroscopy systems and calibration strategies for atmospheric δ13C measurement