Abstract:For the first time, the influences of two inevitable processing fields (pressure and flow fields) on the crystallization of a semirigid molecular chain polymer, that is, poly(l-lactic acid) (PLLA), were explored using a homemade pressuring and shearing device. The results reveal that the shear rate facilitated the generation of precursor because it induced oriented segment formation. It was found that the most sensitive shear temperature for the generation of PLLA precursor under 100 MPa was 180 °C. When the shear temperature was higher (e.g., 190 °C), the relaxation of shear-induced oriented segments was too quick to induce the generation of PLLA precursor. Oppositely, at a lower shear temperature (170 °C), the oriented segments were hard to relax within the whole shear rate range (3.1-31.4 s-1). Annealing treatment was infaust to the PLLA precursor formation because it promoted the relaxation of oriented segments. Different from the shear and annealing, pressure played a more complicated role in the formation of PLLA precursor. Pressure decreased the free volume between PLLA molecular chains and meantime increased the supercooling of PLLA melt. In addition, PLLA chains tended to form locally oriented segment bundles to adapt to the pressurized state, which facilitated the formation of PLLA precursor and the following crystallization process. These two factors lowered the movability of PLLA chains and suppressed the relaxation of chain, so shear-induced orientation facilitated PLLA precursor formation under pressure. In that case, pressure and shear flow showed a synergetic promoting effect on the generation of PLLA precursor and the following crystallization process. These meaningful results could be helpful for comprehending the relationship between crystallization conditions and the crystallization behavior of PLLA and thus would provide guidance to fabricating the final products through controlling the crystallization process of PLLA.

Flow-induced Crystallization of Polymers under Pressure

Molecular Evolution Mechanism of Flow-Induced Crystallization in Polyphenylene Sulfide

Flow-Induced Polymer Crystallization under Pressure and Its Engineering Application in "structuring" Polymer Processing

A Criterion for Flow-Induced Oriented Crystals in Isotactic Polypropylene under Pressure

Flow‐induced Crystallization of Polylactide Stereocomplex under Pressure

Role of lamellar thickening in thick lamellae formation in isotactic polypropylene when crystallizing under flow and pressure

Flow-Induced Precursor Formation of Poly(l-lactic Acid) under Pressure

A Revisit to the Flow and Pressure Jointly Induced Thick Lamellae in Isotactic Polypropylene: A Synchrotron Radiation Small‐ and Wide‐angle X‐ray Scattering Study

Flash Flow-Induced Crystallization of Poly(l-lactide) under Elevated Pressure During Industrial-Scale Injection Molding Revealed by Time-Resolved Synchrotron X-ray Scattering

Flow and Pressure Jointly Induced Ultrahigh Melting Temperature Spherulites with Oriented Thick Lamellae in Isotactic Polypropylene

Thicker Lamellae and Higher Crystallinity of Poly(Lactic Acid) Via Applying Shear Flow and Pressure and Adding Poly(Ethylene Glycol)

Evolution of Polymorphic Structure in Β-Nucleated Isotactic Polypropylene under a Certain Pressure: Effects of Temperature and Flow

Coupling effect of pressure and flow fields on the crystallization of Poly(vinylidene fluoride)/Poly(methyl methacrylate) miscible blends

Extensional Flow-Induced Dynamic Phase Transitions in Isotactic Polypropylene.

Crystallization of Linear Low Density Polyethylene on an in Situ Oriented Isotactic Polypropylene Substrate Manipulated by an Extensional Flow Field

Unexpected Shear Dependence of Pressure-Induced Γ-Crystals in Isotactic Polypropylene

Effect of Flowing Preformed Spherulites on Shear-Induced Melt Crystallization Behaviors of Isotactic Polypropylene

Recent Progress in Flow‐induced Polymer Crystallization

Window of Pressure and Flow to Produce Β-Crystals in Isotactic Polypropylene Mixed with Β-Nucleating Agent

Rapid Melt Crystallization of Bisphenol-A Polycarbonate Jointly Induced by Pressure and Flow

Flow-induced Crystallization Precursor Structure in High Molecular Weight Isotactic Polypropylene (Hmw-Ipp)/low Molecular Weight Linear Low Density Polyethylene (LMW-LLDPE) Binary Blends