Experimental Study on Deformation and Failure Characteristics of Interbedded Anti-inclined Rock Slopes Induced by Rainfall
Bocheng Zhang,Huiming Tang,Kun Fang,Bingdong Ding,Qihang Gong
DOI: https://doi.org/10.1007/s00603-023-03633-4
IF: 6.518
2024-01-19
Rock Mechanics and Rock Engineering
Abstract:Rainfall with heavy intensity and long duration is a main inducing factor that triggers landslides on anti-inclined rock slopes. Numerous interbedded anti-inclined rock (IAR) slopes in Southwest China frequently experience mountain collapses and landslides under heavy rainfall. Therefore, it is necessary to study the failure mode of IAR slopes during rainfall. In this study, the Linda landslide and Mari landslide, typical IAR landslides in the study area, were used as examples to build a physical model of IAR slopes under continuous rainfall conditions, and a self-made rainfall simulation system was used to mimic natural rainfall conditions. The multi-physics data of displacement, velocity, stress, strain, pore water pressure, and acoustic signals in model deformation and failure under rainfall conditions were obtained using multi-field monitoring technology. In addition, the materials' water content and mechanical parameters at different locations of the model were obtained after the experiment. The analysis results indicate that: in the first and middle periods of rainfall, the slope model experienced a shallow local deformation and a holistic toppling deformation; until the late rain, the failure of the IAR slope caused by rainfall finally presented a typical failure mode of multiple failures and collapses of regressive landslides. According to its multi-field evolution characteristics, the velocity and acoustic signals were highly consistent with the failure characteristics of the model, which could be used as landslide early warning indicators. In addition, it was observed that the shape of the multi-slip surfaces generated by the model was a concave double straight line extending from the slope toe to the slope surface and sharing the failure section at the slope toe. Finally, the deformation and failure process of the model could be speculated to be divided into five stages based on the deformation behavior and multi-field physical data feature: the initial interlayer dislocation stage, the deformation stage, the crack propagation stage, the retrogressive failure stage, and the holistic failure stage. The failure mode and deformation mechanism of IAR slopes under rainfall were revealed in the model test, which could provide appropriate guidance for the analysis and evaluation of similar landslides.
geosciences, multidisciplinary,engineering, geological