Abstract:Saturated soil shear strength is a primary factor that reflects the driving resistance of agricultural machinery in paddy soils. The determination of soil shear strength indicators, such as cohesion and internal frictional angle, is crucial to improve the walking efficiency of agricultural machinery in paddy soils. However, the measurement of these indicators is often costly and time-consuming. Soil moisture content, density, and clay content are crucial factors that affect the cohesion and internal friction angle, while very limited studies have been performed to assess the interactive effects of the three factors on soil shear characteristics, especially on paddy soils. In this study, eight soil samples were taken from eight paddy fields in Southeastern China, and the central composition rotatable design was used to classify the soil samples into five levels based on different clay content (X1), moisture content (X2), and density (X3). The direct shear tests were carried out indoors on the remolded paddy soil using a self-made shear characteristic measuring device. Then, both individual and interactive effects of X1, X2, and X3 on soil cohesion and internal friction angles on paddy soils were systematically investigated and analyzed using the regression analysis method in the data processing software Design-Expert. Our results indicated that the effects of the three environmental factors on soil cohesion were in the order of X1 > X2 > X3, while the order was X2 > X3 > X1 for the impact on internal friction angle. The interactive effects were in the order of X1X2 > X1X3 > X2X3 for cohesion and X1X2 > X2X3 > X1X3 for internal friction angle. Two prediction models were successfully established to quantify the soil cohesion and internal friction angle as affected by soil physical properties, and the coefficient of determination (R2) was 0.91 and 0.89 for the two equations, respectively. The model validations using new soil samples suggested that the models were capable of predicting the shear characteristic parameters under different physical parameters effectively, with errors between predicted and measured soil shear strength indicators within 15% and relative root mean square error less than 11%.

STUDY ON CORRELATIONS OF PHYSICAL AND MECHANICAL PRO-PERTY INDEXES OF YANGZHOU CLAYS

Experimental Study on Clay Pore Microstructure Based on SEM and IPP

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Microstructural Change Of Clay Under Compression

Statistical Analysis On Physical Properties Of Shanghai Soft Clay

Compression behaviour of natural and reconstituted clays

Hydraulic Conductivity of Reconstituted Clays Based on Intrinsic Compression

STUDY OF INFLUENCE OF PARAMETERS OF INTERMEDIATE PRINCIPAL STRESS AND PRINCIPAL STRESS DIRECTION ON ANISOTROPY OF INTACT CLAY

Dynamic Properties of Composite Cemented Clay.

CORRELATION BETWEEN CHEMICAL PROPERTIES AND DEPOSITIONAL ENVIRONMENT OF UPPER SHANGHAI CLAYS

Thermal physical experimental and parameters correlation of silty clay of Suzhou city

Study of Failure Criterion for Hangzhou Intact Soft Clay under Complex Stress Path

Experimental Study on the Correlation Between Shear Characteristic and Physical Parameters of Paddy Soil in Plastic State

COUPLING EFFECTS OF INITIAL SHEAR STRESS AND LOADING RATE ON STRENGTH BEHAVIORS OF SATURATED SOFT CLAY

Correlation analyses of effects of temperature on physical and mechanical properties of clay

Experimental study of pore-size distribution of Shanghai soft clay

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

Estimating Hydraulic Conductivity of Naturally Sedimented Clays Using Compression Curves

Change of hydraulic conductivity during compression of undisturbed and remolded clays

An experimental study of the physical and mechanical behavior of the saturated lateritic clay in western Zhejiang

Experimental Study on the Correlativity Between the Physical and Mechanical Parameters of Foundation Clay in Nanjing Subway Engineering