Abstract:The paper deals with a development of a new procedure to perform probabilistic block theory analysis using the vector method. The procedure includes the following three main features: (a) the joint orientation is considered as a bivariate distribution including the correlation that exists between the joint dip angle and dip direction angle; (b) the variability of discontinuity shear strength is incorporated in the analysis; (c) it performs deterministic and probabilistic block theory analysis including the mode of failure (MOF), maximum safe slope angle (MSSA), factor of safety (FS) and the instability probabilities for different cut slope dip angles (CSDA) and different MOFs. A rock slope at a hydropower station in China is used as a case study to illustrate the use of the developed procedure. The slope has six sets of discontinuities. Therefore, both deterministic and probabilistic block theory analyses were conducted for 4-plane, 5-plane, 6-plane and 7-plane blocks to study the stability of the rock slope under different MOFs and CSDA. For most MOFs, the MSSA obtained through deterministic analysis were found to be significantly higher than the CSDA obtained corresponding to zero instability cumulative probability. The differences obtained between the deterministic and probabilistic analyses resulted mainly due to the variability of discontinuity orientation. The case study illustrated the importance and superiority of the probabilistic analysis over the deterministic analysis. For the investigated rock slope by selecting the CSDA of 40° and 50°, the total instability cumulative probability can be limited to less than 5% and 10%, respectively.

OBJECT ORIENTED PROGRAMMING TECHNIQUE FOR RANDOM PARAMETER BACK ANALYSIS OF EARTH-ROCK DAMS

Numerical Analysis of Buried Pipe Characteristics

Application of Object-Oriented FEM in Biot Consolidation Programming

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Probabilistic Evaluation of Ground-Support Interaction for Deep Rock Excavation Using Artificial Neural Network and Uniform Design

Stability Analysis of Rock Slope Based on Random Damage Mechanics

Principle of Maximum Entropy for Back Analysis in Geotechnical Engineering

Random Analysis Method for Nonlinear Interaction Between Shield Tunnel and Spatially Variable Soil

Back-analysis of dynamic property of earth-rock dam considering parameter uncertainly

2-D element analysis of environmental effect caused by pipe jacking

Random Field Model of Soil Property and Analysis of Variability of Pile-Settlement

A FORM‐based approach for probabilistic analysis in geotechnics: Application to a reinforced concrete drainage culvert

Back-Analysis of Indoor Test Parameters for Rock-Fill of Shui Bu Ya CFRD

Development of a probabilistic block theory analysis procedure and its application to a rock slope at a hydropower station in China

Reliability analysis of basal-heave in a braced excavation in a 2-D random field

Conditional Probability-Based System Reliability Analysis for Geotechnical Problems

The Safety assessment of an earth core dam base on in-situ measurement and back analysis

A novel back-analysis method for improving predictions of time-dependent ground settlements in deep excavations in soft soils

RANDOM RESPONSE ANALYSIS OF ARCH DAM SUBJECT TO SEISMIC EXCITATIONS

Applications to Analyze Earth and Rockfill Dam Mode with Expert Systems

Dynamic Back-Analysis of Material Parameters of Nuozhadu High Earth-Rock-fill Dam