Creep Constitutive Model and Numerical Realization of Coal-Rock Combination Deteriorated by Immersion
Xuebin Li,Xuesheng Liu,Yunliang Tan,Qing Ma,Baoyang Wu,Honglei Wang
DOI: https://doi.org/10.3390/min12030292
IF: 2.5
2022-02-25
Minerals
Abstract:Coal-rock combination refers to the coal and rock as a whole, and the failure of the whole structure of the combination is the main cause for the instability of the deep underground engineering. In deep underground engineering, the coal-rock combination is usually under certain hydrogeological conditions, and it is prone to seepage and rheological failure instability accidents due to the long-term action of water and stress. In this study, the creep constitutive model of coal-rock combination considering the influence of moisture content was established based on the Burgers creep model. According to the experimental results of triaxial creep of rock, the relationship between the moisture content and the parameter of the Burgers creep model was derived, and the correctness of the constitutive model in this study was verified. Then, through the C++ language, the core equation of the model was modified, and the numerical calculation of the model was realized by introducing the coal-rock combination creep model considering the influence of moisture content into FLAC3D numerical simulation software. Finally, the model was used to simulate and study the creep characteristics of coal-rock combination with different moisture contents under triaxial loading. The results showed that the stress environment and moisture content have significant effects on the creep characteristics of the coal-rock combination. Under the same stress state, with the increased of moisture content, the strain rate of the coal-rock combination exhibited a non-linear rapid increase in the constant-velocity creep stage, the limit creep deformation and the instantaneous elastic deformation increased, and the viscosity coefficient was significantly decreased. For example, when the axial stress was 5 MPa and the moisture content increased from 0% to 1.5%, the strain rate increased by 44.06%, the limit creep deformation increased by 20%, the instantaneous elastic deformation increased 10.53%, and the viscosity coefficient decreased by about 50%. When the moisture content is 0%, the axial stress increased from 5 to 14 MPa, and the limit creep deformation increased nearly four times. With the increase of moisture content, this value will further expand. The research conclusions can provide a certain reference basis for the long-term stability control of surrounding rock in underground engineering affected by the water.
geochemistry & geophysics,mineralogy,mining & mineral processing