SUSPENDED SEDIMENT CONCENTRATION MEASUREMENTS WITH ADCP:FEASIBILITY ANALYSIS AND IN SITU CALIBRATION

CHENG Peng,GAO Shu
DOI: https://doi.org/10.3321/j.issn:0029-814x.2001.02.008
2001-01-01
Abstract:For more than a decade,it has been recognized that the back—scattered ADCP signal can be used to extract information on suspended objects. The present work, based on in situ neasurements of suspended sediment concentrations by filtering of water samples and calculation of mean volume back-scattering strength (Sv)of a 307.2kHz BBABCP, assesses the potential of ADCPs to measure the concentration quantitatively. Regression analysis shows that good correlation exists between the eoncentrafion (measured by filtration) and Sv,and the mean relative error is less than 109%. These results suggest that the ADCP has the ability to measure the concentration under the condition that the grain size distribution of suspended material varies little during the survey pehod. An in situ calibration formula has been developed and used to calculate the suspended sediment concentration profile. The results indicate that the calibration parameter C' varies with the depth,but its temporal variation is small at the same depth during a tidal cycle. Thus, the statistical error of concentration calculation associated with a profile-averaged C' value by the formula obtained ranges between 29% and 43 9 ,and it becornes less than 20% when a time-average value for different depths of the profile is used. The present study demonstrates the potential of ADCPs for direct measurement of suspended sediment concentration profiles.
What problem does this paper attempt to address?