Surface precision analysis on main reflector of 65 m antenna structure
Hongliang Qian,Yan Liu,Feng Fan,Li Fu,Guoxi Liu
DOI: https://doi.org/10.3969/j.issn.1007-2276.2012.11.031
2012-01-01
Abstract:To master the influences of several kinds of loads on surface geometry, supply actuators with the adjustments datum, and guarantee the excellent working performance of giant radio telescope, with Shanghai 65 m antenna structure as the research object, the accuracy problem on main reflector was throughly studied. Firstly, the method of seeking for a best-fit paraboloid and the method of calculating surface precision were illustrated. Then, the method of solving optimum angle of installing and adjusting reflector was introduced and the optimum angle was found. Finally, the influences on surface precision from gravity, wind loads and thermal action were systematically analyzed, besides it came to the conclusions in detail. In the analysis above, different pitching angles, wind velocities, non-uniform temperature field and reflective panel stiffness were all considered separately. The results indicate that the optimum installing and adjusting angle is 48.9°, and according to that the maximum value of precision under gravity load is 0.73 mm at the pitch angle of 5°. The influence of non-uniform temperature field from sunshine approaches that of gravity load, so this cannot be neglected. Compared with gravity load, the influences of normal wind speed and uniform temperature field on surface precision are quite minor, and have differences in order of magnitude. The analytical method and results provide corresponding references for such similar antenna structures design or surface precision research of reflector, and have special significance.