Abstract:Flat-fielding spectro-polarimetric data with one spatial and one spectral dimension is inherently difficult as the imprint of the spectral lines needs to be separated from other wavelength-dependent instrumental effect (e.g., fringes or prefilter profiles) and wavelength-independent effects (e.g., dust and sensor response). Current approaches for spectrometers are often based on moving the grating or they depend on optical models and/or on lab calibration data. They are also limited to small spectral regions and are instrument-specific. Approaches that would be suitable for polarimeters have not been reported yet. We present an approach that allows for flat-field calibration data to be to obtained for diffraction-grating-based, long-slit spectrographs combined with temporally modulated polarimetry from high-resolution solar telescopes. This approach is based on nominal flat-fielding procedures performed during the instrument's science operations. We performed a precise and field-dependent correction of the spectrographic distortion effect (resulting in curved spectral lines, typically denoted as a "smile" effect) to ensure the orthogonality of the spectral and spatial dimensions. We identified distortions by tracking the position of multiple spectral lines within the full spectral field of view. From the raw modulated flats, we then removed the solar line imprints and derived separate flat-fields for sensor and slit dust features. Optionally, wavelength calibration and continuum correction can be included in this process. We have created generic Python libraries that can be plugged into existing Python-based data reduction pipelines or used as a standalone calibration tool. We show that for spectrographs covering many spectral lines, a correction of the smile distortion based on optical models alone is not sufficient. Our results demonstrate a suppression of fringes, sensor artifacts, and fixed-pattern imprints in demodulated data by one order of magnitude. For intensity images, the photon noise level can be closely attained after calibration. Our correction works across the full spectral range. The algorithm was tested for different wavelength regimes with emission (EUV range) or absorption (near-UV, VIS, IR range) spectra, on data acquired with ground-based (SST/TRIPPLE-SP, GREGOR/GRIS), balloon-borne (SUNRISE-III/SUSI), and space-based (SolO/SPICE) instruments. The data calibrated with our method offer robust and precise inversion results. We have extended existing spectroscopic flat-field techniques to modern instruments with large imaging sensors covering many spectral lines simultaneously, and with polarimetric capabilities, where methods described so far are not adequate. We believe that our method is applicable as a standard calibration approach for most modern high resolution large-FOV, long-slit spectrographs -- both with and without polarimetric capabilities.

Flat-fielding of the Solar Spectrograph with the Engineered Diffuser

Flat-fielding of Full-disk Solar Images with a Gaussian-type Diffuser

A new post-hoc flat field measurement method for the Solar X-ray and Extreme Ultraviolet Imager onboard the Fengyun-3E satellite

Methodology for in-flight flat-field calibration of the Lyman-alpha solar telescope (LST)

Dome-Diffuser Flat-fielding for Schmidt Telescopes

Self-calibration of Fizeau interferometer and planar scale gratings in Littrow setup.

Selection Of In-Flight Flat-Field Calibration Dither Pattern For The Solar Disk Imager Of The Lyman-Alpha Solar Telescope

A New Method Of Calculating The Diffraction Efficiency For Diffraction/Refraction Infrared Hybrid System

Ground flat-field calibration of a space astronomical telescope using a spatial time-sharing calibration method

A Diffraction Effect Investigation for the Solar Irradiance Absolute Radiometer on the Fengyun-3F Satellite

Solar Observation with the Fourier Transform Spectrometer. II. Preliminary Results of Solar Spectrum Near the CO 4.66 M and Mg I 12.32 M

[EUV Flat Field Grating Spectrometer and Performance Measurement].

Overall study of solar simulation optical system with large irradiated surface using free-form concentrator to improve uniformity

Updated Multichannel Infrared Solar Spectrograph at Purple Mountain Observatory

Calibration of Solar Radio Spectrometer of the Purple Mountain Observatory

Spectroflat: A generic spectrum and flat-field calibration library for spectro-polarimetric data

Optomechanical Design and Application of Solar-Skylight Spectroradiometer

Non-uniform temperature field measurement and simulation of a radio telescope's main reflector under solar radiation

Optical design of a Sub-Angular Second Spatial Resolved Solar Extreme Ultraviolet Broadband Imaging Spectrometer

Research on Calibration Sources for a 35–40 GHz Millimeter-Wave Solar Radio Observation System

Measurement of Equivalent BRDF on the Surface of Solar Panel with Periodic Structure