Abstract:At present, many modification methods have been proposed to improve the performance of recycled aggregate concrete (RAC). In this study, tests on the compressive strength and damping properties of modified RAC with the addition of different proportions of recycled coarse aggregate (RCA) (0, 50, 100%), rubber powder (10, 15, 20%), steel fibre (5, 7.5, 10%) and fly ash (15, 20, 5%) are carried out. To elucidate the effect of the modification method on the interfacial transition zone (ITZ) performance of RAC, model ITZ specimens are used for push-out tests. The results show that when the replacement rate of RCA reaches 100%, the loss factor of the RAC is 6.0% higher than that of natural aggregate concrete; however, the compressive strength of the RAC decreases by 22.6%. With the addition of 20% rubber powder, the damping capacity of the modified RAC increases by 213.7%, while the compressive strength of the modified RAC decreases by 47.5%. However, with the addition of steel fibre and fly ash, both the compressive strength and loss factor of the RAC specimens increase. With a steel fibre content of 10 wt%, the compressive strength and loss factor of the RAC increase by 21.9% and 15.2%, respectively. With a fly ash content of 25 wt%, the compressive strength and loss factor of the RAC increase by 8.6% and 6.9%, respectively. This demonstrates that steel fibre and fly ash are effective in improving both the damping properties and compressive strength of RAC, and steel fibre is more effective than fly ash. Two methods were used for modification of the RAC: reinforcing the RCA through impregnation with a 0.5% polyvinyl alcohol (PVA) emulsion and nano-SiO 2 solution, and strengthening the RAC integrally through the addition of fly ash as an admixture. Both of these techniques can improve the ITZ bond strength between the RAC and new mortar. Replacing 10% of the cement with fly ash in the new mortar is shown to be the best method to improve the ITZ strength.

Comparison on Performance of Natural Rubber Reinforced by Normal Fly Ash/Circulating Fluid Bed Ash

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Effect of graphite and its surface modification on thermal conductivity of silicone rubber

Dynamic Fatigue Behavior of Natural Rubber Reinforced with Nanoclay and Carbon Black

Advanced Coal Fly Ash Modification by Using Corrosive Microorganisms As Alternative Filler-Reinforcing Fluororubbers

Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography

Reinforcing Behavior of Reclaimed Rubber Filled Natural Rubber Composites

Enhanced fatigue resistance of plasma modified pyrolysis carbon black filled natural rubber composites

Properties of cellular lightweight rubber wood fly ash geopolymer mortar containing cement

Processing characteristics and mechanical and electrical properties of chlorinated styrene–butadiene rubber/fly ash composites

Reinforcing efficiency of nanomaterials on mechanical and interfacial characteristics of green concrete incorporating fly ash cenosphere

Use of Slag to Improve Mechanical Properties of Engineered Cementitious Composites (eccs) with High Volumes of Fly Ash

Modified nanocrystalline cellulose partially replaced carbon black to reinforce natural rubber composites

Comparative Study on the Natural Rubber Nanocomposites Reinforced with Carbon Black Nanoparticles and Graphite Oxide Nanosheets

Study on static and dynamic mechanical properties and microstructure of silica fume-polypropylene fiber modified rubber concrete

Enhancement of the mechanical and tribological properties of carboxylated acrylonitrile butadiene rubber filled with cryptocrystalline graphite by different preparation methods

Surface Modification of Rice Husk Ash by Ethanol-assisted Milling to Reinforce the Properties of Natural Rubber/Butadiene Rubber Composites

Enhancing the thermal and mechanical properties of carbon fiber/natural rubber composites by co-modification of dopamine and silane coupling agents

Treatment of Coal Fly Ash and Environmentally Friendly Use with Rubber in Cable Wires as Insulation Material

Effect of Finely Ground Coal Bottom Ash as Replacement for Portland Cement on the Properties of Ordinary Concrete

Experimental study on the compressive strength, damping and interfacial transition zone properties of modified recycled aggregate concrete