Simulation Experiment on Surface Deformation Evolution Regulation of Loess Slope under Dry-wet Alternate Environment

Zhi-jie SUN,Peng-yong MIAO

DOI: https://doi.org/10.3969/j.issn.1671-1815.2018.10.020

2018-01-01

Abstract:The distribution area of loess is generally arid or semi-arid.The loess developed in this environment features loose,porous and sensitive to water,which makes the loess slope failure easily under rainfall /drying cycle. The model box which can control rainfall intensity and dry strength was designed.The basic principle of FBG sen-sor was introduced.FBG sensors suitable for slope deformation monitoring was packaged.The model of loess slope was filled in accordance with model scale 1:100,and the influence of dry wet cycle times and amplitude on slope surface deformation was simulated.The experimental results show that the wetting-drying cycles would have a sig-nificant impact on surface deformation of loess slope.With the increase of cycle times,the slope was more prone to failure.The low amplitude wetting-drying cycles made slow surface deformation of slope and the high amplitude wetting-drying cycles made rapid surface deformation of slope.In the process of dry and wet circulation,the slope began to bear large tensile strain and then gradually changed into compressive strain under the influence of gravity and seepage force.After a few cycles,a large deformation occurred on the slope,indicating that there is a critical node in the destruction of the loess slope.FBG can be applied to monitoring the failure of loess slope,and further research is needed in practical application field.