Abstract:Eddy current damping has been widely applied in mechanical engineering; however, its adaptation for civil engineering applications remains rather limited due to its low density of energy dissipation. This study presents the development of a new type of eddy current damper and theoretical and experimental characterization of its damping properties. In addition to rectangular permanent magnets and conductive plate, both primary back iron and secondary back iron are considered in the proposed eddy current damper, which represents an improved design over previous configurations. The analytical method based on the charge model of permanent magnets is extended to simulate the extra damping effect of the primary back iron and secondary back iron, and the magnet field and damping properties of the dampers are evaluated analytically. The use of a back iron in the proposed damper is shown to increase the damping coefficients by a factor of up to 5. The analytical results are compared with those obtained with the finite-element analysis in terms of accuracy in magnetic field distributions, eddy current distributions, and damping coefficients. The linear assumption, which implies the damping force is linearly proportional to velocity in the analytical model, is also examined for different motional velocities and relative permeability of the permanent magnet. It is shown that the linear damping assumption in the analytical model is only valid for a limited range of low velocity, and this velocity range can be increased by reducing the thickness or conductivity of the conductive plate. In addition, a modification is needed for the analytical model if the relative permeability of the permanent magnet significantly deviates from the assumed value of 1.0. Finally, the accuracy of the analytical model and the finite-element model is verified by experiment of a prototype damper mounted in a laboratory steel frame.

Analysis of Static and Dynamic Characteristics of Metal-net Damper

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Modeling the Loading-Rate Dependency of the Hysteretic Dynamics of Magnetorheological Dampers

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

An investigation on the field strength and loading rate dependences of the hysteretic dynamics of magnetorheological dampers

Modeling and Experiments Study of Inverse Magnetostrictive Effect for a New Kind of Passive Adaptive MR Damper

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Numerical Simulation and Test for a Turbine Damper

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

Hysteretic Performance Test and Simulation Analysis of A New Type of Mild Steel Damper

Energy Dissipation Characteristics And Dynamic Modeling Of The Coated Damping Structure For Metal Rubber Of Bellows

EXPERIMENT AND MODELING RESEARCH ON HYSTERETIC LOOP OF MAGNETORHEOLOGICAL DAMPER

Characterization and modeling a MR damper under sinusoidal loading

Nonlinear Characteristic Investigation of Magnetorheological Damper-Rotor System with Local Nonlinearity

Modeling, Testing, and Validation of an Eddy Current Damper for Structural Vibration Control

Design and experimental study of the porous foam metal magnetorheological fluid damper based on built-in multi-pole magnetic core

Analytical Analysis Approach to Nonlinear Dynamic Characteristics of Hydraulically Damped Rubber Mount for Vehicle Engine

Physical Parametric Model of an Automotive Electrohydraulic Semiactive Damper

Dynamic modeling and computer simulation analysis of the air spring suspension

Design, Modeling, and Vibration Control of a Damper Based on Magnetorheological Fluid and Elastomer