Multiphysics and multi-scale design and analysis of nuclear thermal propulsion pellet bed reactor based on spherical cermet fuel element
Linyuan Lu,Shiqi Sun,Bin Tang,Guoqiang Wang,Ye Dai,Yajuan Zhong,Jun Lin
DOI: https://doi.org/10.1016/j.anucene.2024.110446
IF: 1.9
2024-03-15
Annals of Nuclear Energy
Abstract:Due to the advantages of high thrust and high specific impulse, nuclear thermal propulsion (NTP) is a preferred near-term rocket engine technology for future Mars missions. This article introduces the reactor design based on spherical cermet fuel element, with the aim of studying the feasibility of applying this new fuel in NTP system. First, design requirements are determined based on the unique features of NTP. In terms of neutronics, the effect of rocket launch accidents and fuel loss caused by high-temperature hydrogen are considered. Thermal hydraulics refer to the requirements of NASA's Mars Design Reference Architecture 5.0 (DRA 5.0) for impulse, thrust, and thrust to weight ratio. Second, based on the requirements above, the optimal reactor configuration parameters are obtained with the goal of maximizing the thrust to weight ratio: reactor radius 51.1 cm, height 106 cm, aspect ratio 1.04, reflector 13 cm, and reactor mass 3940 kg. Finally, the performances of the optimal reactor design are analyzed. The neutron spectrum shows a characteristic of fast neutron spectrum, and fuel loss analysis shows that the core can withstand a fuel mass loss of about 4 wt%. In addition, the core axial and radial power distribution are calculated, with an overall power peak factor of 1.26. The thermal hydraulic calculation provides a range of core operating conditions that satisfy the design requirements of DRA 5.0 and temperature, with power of 620 ∼ 950 MW and flow rate of 16 ∼ 24 kg/s. Compared with the ANL200/2000 reactor using prismatic cermet, it has the advantage of higher specific impulse. The main disadvantage is the large pressure drop, which prevents it from being applied to the scenarios of high power and high thrust. Therefore, for NTP reactor using spherical cermet elements, it should be applied to low to medium power scenarios.
nuclear science & technology