Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Phase Field Study on Effect of Initial Microstructure on Grain Growth

Effect of Different Initial Structures on the Simulation of Microstructure Evolution During Normal Grain Growth Via Phase-Field Modeling

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Phase Field Modeling of Columnar Grain Growth:Effect of Second-Phase Particles

Investigating the effects of grain boundary energy anisotropy and second-phase particles on grain growth using a phase-field model

Phase Field Modeling for Effects of Spherical and Discal Second-Phase Particles on Grain Growth

Multi-Phase Field Simulation of Grain Growth in Multiple Phase Transformations of A Binary Alloy

PHASE-FIELD SIMULATION OF TWO-PHASE GRAIN GROWTH WITH HARD PARTICLES

Phase Field Simulation on Grain Growth with Particles Located on Grain Boundaries

Phase-Field Study for the Growth Kinetic and Topology Transformation Mechanism of Grains During Solidification Process

Phase-field Crystal Study of Topological Evolution During Grain Annihilation Process in Polycrystalline Materials

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Phase-Field Modeling of Stored-Energy-Driven Grain Growth with Intra-Granular Variation in Dislocation Density

Phase Field Method Simulation of Directional Growth of Grain with Second Phase Particles

Anisotropic Growth of Multigrain in Equiaxial Solidification Simulated with the Phase Field Method

Phase-Field Method Simulation of the Effect of Hard Particles with Different Shapes on Two-Phase Grain Growth

Phase-field Study of the Second Phase Particle Effect on Texture Evolution of Polycrystalline Material

Grain Growth in a Nanostructured AZ31 Mg Alloy Containing Second Phase Particles Studied by Phase Field Simulations

Large-Scale Multi-Phase-Field Simulation of 2D Subgrain Growth

High temperature grain shrinkage under different pre-strains: a phase-field-crystal study

Phase Field Simulation of Grain Growth with Grain Boundary Segregation