Abstract:Abstract In this paper, the combined effects of ribs and double-layer, dome-shaped turning vanes on heat transfer and pressure drop are investigated in an idealized U-bend channel. Five kinds of ribs including transverse ribs, 45° ribs, 135° ribs, V-shaped ribs, and reverse V-shaped ribs combined with one kind of double-layer, dome-shaped turning vanes are applied. Baseline results are compared with the above composite cooling structures. Numerical simulations are performed by solving 3D, steady Reynolds-averaged Navier-Stokes (RANS) equations with k-ω turbulence model. The channel aspect ratio is 1:2 and its hydraulic diameter is 93.13 mm, respectively. Based on the cooling air inlet velocity and the channel inlet hydraulic diameter, the inlet Reynolds numbers are ranging from 100,000 to 440,000. The detailed three-dimensional fluid flow, pressure and heat transfer distributions are presented. Moreover, the thermal performances of the U-bend channel are also evaluated and compared with different cases. The results revealed that combined with the double-layer, dome-shaped turning vanes, the transverse ribs case has the best thermal performance at the tip wall, and the reverse V-shaped ribs case is the best for the leading wall. The pressure drop of the channel with double-layer, dome-shaped turning vanes without any rib turbulator is the lowest, and that of the channel with inclined ribs is significantly higher than that of the channel with transverse ribs. The superposition of the secondary flow induced by the ribs and the Dean vortex induced by the 180° sharp turn has a marked impact on the flow and heat transfer in the channel. In the double-layer, dome-shaped turning vanes channel, the mass flow distribution of the coolant also affects the heat transfer on the tip wall of the channel, and the ribs can adjust the mass flow distribution. The helical vortex superposed by the mainstream flow and the secondary flow induced by the ribs represents typical flow phenomenon in ribbed channels. The flow and development of the helical vortex are the main factors affecting the heat transfer on the leading/trailing walls.

Influence of rib angle on heat transfer and flow characteristics in a rectangular channel used steam as the coolant

Heat Transfer Intensification of Steam for the Cooling Process in 90° Rib Rectangular Channels

Experimental Investigation on Heat Transfer and Friction Characteristics of Ribbed Rectangular Channels Using Steam As Coolant

Effects of Rib Angle and Rib Orientation on Flow and Heat Transfer in Two-Pass Ribbed Channels

Numerical Prediction of 45° Angled Ribs Effects on U-shaped Channels Heat Transfer and Flow under Multi Conditions

Comparative Study of Convective Heat Transfer Performance of Steam and Air Flow in Rib Roughened Channels

Study on Conjugate Thermal Performance of a Steam-Cooled Ribbed Channel with Thick Metallic Walls

Experimental and Numerical Investigation of Convection Heat Transfer in a Rectangular Channel with Angled Ribs

Numerical Study of the Influence of Rib Orientation on Heat Transfer Enhancement in Two-Pass Ribbed Rectangular Channel

Thermal Performance of Angled, V-shaped and Leaning-V-shaped Ribs in a Rotating Rectangular Channel with 45° Orientation

Numerical Study of Conjugate Heat Transfer of Steam and Air in High Aspect Ratio Rectangular Ribbed Cooling Channel

Effect of rib orientation on heat transfer and flow characteristics of mist/steam in square channels

Experimental and Numerical Investigation of Convection Heat Transfer in Channels with Different Types of Ribs

Investigation on the flow and heat transfer of mist/steam cooling in two-pass ribbed channels with various aspect ratios

Flow and Heat Transfer Performance of the Channel with Different Shaped Ribs Cooled by Mist/steam Two-Phase Flow

Numerical Predictions on Heat Transfer and Flow Characteristics in a Straight Channel with Different Geometric Parameters Wavy Ribs

Parametric Study on Flow Characteristics and Heat Transfer in Rectangular Channels with Strip Slits in Ribs on One Wall

Improving heat transfer performance in two-pass ribbed channel by the optimized secondary flow via bend shape modification

The Effect of Cooling Conditions on Convective Heat Transfer and Flow in a Steam-Cooled Ribbed Duct

Effect of Ribs on Heat Transfer and Pressure Drop in a U-Bend Channel With Double-Layer, Dome-Shaped Turning Vanes

Study on the flow and heat transfer characteristic of steam in serpentine internal cooling channel