Abstract:In large-scale welding processes involving complex geometries, variations in gap dimensions and the transition of filler wire form distinctive molten pool flow behaviors, significantly affecting weld formation and quality. This paper investigates the differences in the laser self-melting and wire-filling welding pool behavior of titanium alloy with variable gaps through both simulation and experimentation. An innovative three-dimensional transient heat-flow coupling model is developed to simulate laser welding with variable gap structures, incorporating the dynamics of the welding wire-filling process. The different laser welding modes and the filling process under the variable gap structure were numerically simulated. The results indicate that the maximum flow rate of the laser self-melting pool remains stable in proximity to the keyhole, reaching a maximum of approximately 2.491 m/s, with molten metal entering through the area surrounding the keyhole. As the gap size gradually increases to 0.2 mm during the laser self-fusion welding stage, keyhole instability becomes more pronounced. In transitioning from laser self-fusion to wire-filling welding, the welding wire behavior can be divided into three stages. The molten metal at the end of the welding wire is transferred to the liquid melt pool through a liquid metal bridge. The flow rate of this bridge initially rises before gradually decreasing, reaching a maximum flow rate of 1.606 m/s. Notably, the welding wire lags approximately 0.6 mm behind the laser's focal point, with the narrowest width of the liquid bridge measuring about 0.89 mm. Based on the simulation results and considering the melting transition time of the welding wire, the initiation time for the welding wire has been further adjusted to the first 10 ms when the gap threshold reaches 0.2 mm. Experimental verification confirms the successful laser welding of a 2 mm variable gap structure thin plate. This study elucidates the melt pool flow, keyhole fluctuations, and metal transition behaviors during the laser welding process, contributing to a deeper understanding of the complex heat and mass transfer dynamics inherent in variable gap structure laser self-melting and wire-filling welding. Ultimately, these insights aim to enhance the application of laser welding in adaptive welding for large structural components.

Flow Characteristics of the Molten Pool in Pulsed Laser Welding of Thin Sheet with Filler Wire

Flow Patterns in the Weld Pool During Laser-Plasma Hybrid Welding

Molten flow simulation of laser deep penetration welding of aluminum alloys

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Study of Molten Pool Dynamics and Porosity Formation Mechanism in Full Penetration Fiber Laser Welding of Al-alloy

Connection Mechanism of Molten Pool during Laser Transmission Welding of T-Joint with Minor Gap Presence

Study On Fluid Flow And Heat Transfer Characteristics Of Molten Pool Considering The Effects Of Turbulence

Dynamic Behavior of Molten Pool Backside During Full-Penetration Laser Welding of Ni-based Superalloys

Numerical Analysis of Internal Flow of Molten Pool in Pulsed Gas Tungsten Arc Welding Using a Fully Coupled Model with Free Surface

Numerical study of thermal fluid dynamics and solidification characteristics during continuous wave and pulsed wave laser welding

Numerical Simulation of Spatter Formation During Fiber Laser Welding of 5083 Aluminum Alloy at Full Penetration Condition

Numerical Simulation of Preheating Temperature on Molten Pool Dynamics in Laser Deep-Penetration Welding

The investigation of molten pool dynamic behaviors during the “∞” shaped oscillating laser welding of aluminum alloy

Thermal and Fluid Flow Characteristics and their Relationships with Porosity in Laser Welding of AA5083

Documenting weld pool behavior differences in variable-gap laser self-melting and wire-filling welding of titanium alloys

Effects of Solidification on Flow Dynamics: A Novel Comprehension of Defects Formation in Laser Penetration Welding

Numerical simulation of the molten pool character in high power fiber laser welding

Modeling Rapid Solidification and Melting Processes for Multiphase Flows in a Welding Technology Application

Characteristics of droplet transfer, molten pool formation, and weld bead formation of oscillating laser hot-wire tungsten inert gas hybrid welding

Understanding of the Weld Pool Convection in Twin-Wire GMAW Process

Molten Pool Behaviors in Double-Sided Pulsed GMAW of T-Joint: A Numerical Study