Abstract:Background: The LIAC HWL (Sordina IORT Technologies, Vicenza, Italy) is a recently designed mobile linear accelerator for intraoperative electron radiotherapy (IOeRT), producing high dose rate electron beams at four different energy levels. It features a software tool for the visualization of 2D dose distributions, which is based on Monte Carlo simulations. The aims of this work were to (i) assess the dosimetric characteristics of the accelerator, (ii) experimentally verify calculated data exported from the software and (iii) report on commissioning as well as performance of the system during the first year of operation. Methods: The electron energies of the LIAC HWL used in this study are 6, 8, 10 and 12 MeV. Diameters of the cylindrically shaped applicators range from 3 to 10cm. We studied two applicator sets with different length ratios of proximal and terminal applicator sections. Reference dosimetry, linearity as well as short- and long-term stability were measured with a PTW Advanced Markus chamber, relative depth dose and profiles were measured using an unshielded diode. Percentage-depth-dose (PDD) and transversal dose profile (TDP) data were exported from the simulation software LIACSim and compared with our measurements. Results: The device reaches dose rates up to 40Gy/min (for 12 MeV). Surface doses for the 10cm applicators are higher than 90%, X-ray background is below 0.6% for all energies. Simulations and measurements of PDD agreed well, with a maximum difference in the depth of the 50% isodose of 0.7mm for the flat-ended applicators and 1mm for the beveled applicators. The simulations slightly underestimate the dose in the lateral parts of the field (difference < 1.8% for flat-ended applicators). The two different applicator sets were dosimetrically equivalent. Long-term stability measurements for the first year of operation ranged from -2.1% to 1.6% (mean: -0.1%). Conclusions: The system is dosimetrically well suited for IOeRT and performed stably and reliably. The software tool for visualization of dose distributions can be used to support treatment planning, following thorough validation.

A design of applicator used as IORT for pelvis

Clinical Application of Computer-Aided Design and Rapid Prototyping Technique for Radioactive Seeds Contained Maxillary Device

Personalized Intraoperative Radiotherapy Balloon Applicator Design and Production With 3D Printer

Semi-automated Needling and Seed Delivery Device for Prostate Brachytherapy

Design and performance validation of a novel 3d printed thin-walled and transparent electron beam applicators for intraoperative radiation therapy with beam energy up to 12 MeV

Design and kinematic analysis of positioning chair for proton heavy ion radiotherapy

Embedded bleeding detector into a PMMA applicator for electron intraoperative radiotherapy

Design of a Seed Implantation Robot with Counterbalance and Soft Tissue Stabilization Mechanism for Prostate Cancer Brachytherapy

RADIOACTIVE SEED IMPLANTING TEMPLATE AND MANUFACTURING METHOD THEREOF

Intraoperative radiation therapy with 50 kV x‐rays: A multi‐institutional review

Design Analysis and Experimental Study of Robotic Chair for Proton Heavy Ion Radiotherapy

First clinical application of image-guided intraoperative electron radiation therapy with real time intraoperative dose calculation in recurrent rectal cancer: technical procedure

Design of an Instrument Guide for MRI-Guided Percutaneous Interventions

[FreeArcs Knife: a Novel Stereotactic Radiosurgery System]

Analysis the Reconstruction of the Machine Room for Mobile Linear Accelerator for Intra-Operative Radiation Therapy

Radioactive particle implanting template and fabrication method thereof

Commissioning, dosimetric characterization and machine performance assessment of the LIAC HWL mobile accelerator for Intraoperative Radiotherapy

Design of a Seed Implantation Robot with Puncture Force and Image Feedback Mechanism for Prostate Cancer Brachytherapy

SU-FF-T-52: A Robotic Platform for Image-Guided Brachytherapy (IGBT)

A comparative study of dosimetric parameters of 3D-printed non-coplanar template-assisted CT-guided iodine-125 seed implantation brachytherapy in patients with inguinal lymph node metastatic carcinomas.

Individual curved‐needle interstitial template created using three‐dimensional printing for brachytherapy for distal parauterine tumor recurrence