Abstract:Objectives: The polyacrylonitrile (PAN)-poly(methyl methacrylate) (PMMA) core-shell nanofiber reinforced dental composites have been investigated for their excellent interface adhesive, and this kind of novel dental composite has the potential for clinical uses such as denture base resin and crown-bridge material. The first objective of this work was to determine the improving effect of tensile properties by post-drawing PAN-PMMA nanofibers membrane. The second objective was to examine the flexural strength (Fs), flexural modulus (Ey) and work of fracture (WOF) of Bis-GMA/TEGDMA composites reinforced with PAN-PMMA nanofibers. Methods: PAN(core)-PMMA(shell) nanofiber was made by an electrospinning setup with a high-speed rotating rod-like collector. The post-draw process was carried out at 120 degrees C for 5 min, and all the nanofiber membranes were elongated to the desired elongation ratio (30%, 60% or 100%). Tensile properties and flexural properties of both nanofiber membranes and nanofiber reinforced Bis-GMA/TEGDMA composites were investigated. A scanning electron microscope (SEM) was used to observe the fiber morphology and the fracture surface of the composite. A dynamic mechanical thermal analyzer (DMTA) was employed to determine the dynamic mechanical properties such as tandelta and E'. Results: The post-drawing treatment significantly improved the tensile properties and fiber parallelism of nanofiber membranes. The addition of PAN-PMMA nanofibers into Bis-GMA/TEGDMA clearly showed the reinforcement effect; the flexural strength (Fs), flexural modulus (Ey) and work of fracture (WOF) kept rising with the nanofiber mass fraction changing from 0%, 0.6%, 0.8%, 1.0% to 1.2%. The flexural properties of composites reinforced with post-drawn nanofiber were further increased in comparison with those of untreated nanofiber reinforced ones. Also, the SEM observations of the fracture surface of the composites demonstrated good interfacial adhesion between fibers and resin. Significance: The post-drawing treatment was confirmed as a useful method for significantly increasing the tensile strength (673.4%) and tensile modulus (875.3%) of nanofiber membranes. In addition, the composites reinforced with post-drawn PAN-PMMA nanofibers exhibited higher Fs (13.6%), Ey (5.3%) and WOF (30.4%) than those reinforced with as-electrospun PAN-PMMA nanofibers. When 1.2% mass fraction of post-drawn nanofibers were added to Bis-GMA/TEGDMA resin, the Fs, Ey and WOF increased by 51.6%, 64.3% and 152.0%, respectively, compared with neat resin.

DEVELOPMENT OF NEW-GENERATION DENTAL NONMETAL POSTS BY GLASS FIBER REINFORCED ACRYLIC RESIN

Development of dental posts by carbon fiber reinforced resin

Clinical application of new type of carbon fiber reinforced resin post

Flexural Strength of Dental Fiber Composite Post Manufactured with a Novel Approach

Flexural modulus, flexural strength, and stiffness of fiber-reinforced posts

The researchment of nami-material reinfoced dental composite resin

[Investigation on the Short-Term Clinical Application of Two Types of Glass Fiber Posts].

The effects of different chemical etching agents on the surface morphology and flexural strength of fiber posts

High Performance Composites Based on Highly Filled Glass Fiber-Reinforced Polybenzoxazine for Post Application

[Fatigue and Fracture Resistance of the Flared Roots Restored with Computer Aided Design and Computer Aided Manufacturing Glass Fiber Posts].

Comparative study on three resin cements to restore anterior flared roots

Comparison on microtensile bonding strength of three composite resin with glass fiber post

Investigation of Material Properties of One-Piece Glass Fiber Post-and-Core Affecting Biomechanical Responses of the Restorative System

Semi-interpenetrating Interfacial Formation of Glass Fiber Reinforced Dental Resin Bio-Composites and Its Mechanical Properties

Post-draw PAN-PMMA nanofiber reinforced and toughened Bis-GMA dental restorative composite

Mechanical properties and fracture behavior of flowable fiber reinforced composite restorations

Study of Bond Strength of One-Piece Glass Fiber Posts-and-cores with Flared Root Canals in Vitro

Development of a New Fiberglass Reinforced Composite for Computer Aided Design - Computer Aided Manufacturing Applications in Dentistry

Bending properties of glass fiber-reinforced plastic for post materials evaluated by cantilever test

[Influence of Fiber Framework Design on Fracture Strength of Posterior Glass Fiber-Reinforced-composite Resin-Bonded Fixed Partial Dentures].

Comparison of mechanical properties of a new fiber reinforced composite and bulk filling composites