Abstract:Objective: To optimize the culture and fermentation conditions of the Penicillium aurantiocandidum Z12 strain, a fungal strain with molluscicidal actions against Oncomelania hupensis, so as to provide the basis for the research and development of molluscicidal active substances from the P. aurantiocandidum Z12 strain and its fermentation broth and large-scale fermentation. Methods: The carbon source, nitrogen source and mineral salts were identified in the optimal culture medium for the P. aurantiocandidum Z12 strain with a single-factor experiment to determine the best fermentation condition for the P. aurantiocandidum Z12 strain. Factors that significantly affected the growth of the P. aurantiocandidum Z12 strain were identified using the Plackett-Burman design, and the best range of each factor was determined using the steepest climb test. Response surface analyses of temperature, pH value, seeding amount and liquid-filling quantity were performed using the Box-Behnken design to create a regression model for fermentation of the P. aurantiocandidum Z12 strain to identify the optimal culture medium. Results: Single-factor experiment preliminarily identified the best culture medium and conditions for the P. aurantiocandidum Z12 strain as follows: sucrose as the carbon source at approximately 20 g/L, tryptone as the nitrogen source at approximately 5 g/L, K2HPO4 as the mineral salt at approximately 5 g/L, initial pH at approximately 8, temperature at approximately 28 °C, seeding amount at approximately 6%, and liquid-filling quantity at approximately 50 mL/100 mL. Plackett-Burman design showed that factors that significantly affected the growth of the P. aurantiocandidum Z12 strain included temperature (t = -5.28, P < 0.05), seeding amount (t = 5.22, P < 0.05), pH (t = -4.30, P < 0.05) and liquid-filling quantity (t = -4.39, P < 0.05). Steepest climb test showed the highest mycelial growth at pH of 7.5, seeding amount of 8%, and liquid-filling quantity of 40 mL/100 mL, and this condition was selected as the central point of response surface analysis for the subsequent optimization of fermentation conditions. Response surface analyses using the Box-Behnken design showed that the optimal conditions for fermentation of the P. aurantiocandidum Z12 strain included sucrose at 15 g/L, tryptone at 5 g/L, K2HPO4 at 5 g/L, temperature at 28.2 °C, pH at 7.5, seeding amount at 10%, and liquid-filling quantity at 35.8 mL/100.0 mL, resulting in 0.132 g yield of the P. aurantiocandidum Z12 strain. Conclusions: The optimal culture condition for the P. aurantiocandidum Z12 strain has been identified, and the optimized culture medium and fermentation condition may effectively improve the fermentation yield of the P. aurantiocandidum Z12 strain.

Optimization of Fermentation Conditions of Actinomycetes Strain WP-1 from Pinus Dabeshanensis for Fungichromin Production

Optimization of fermentation conditions for production of a novel antifungal metabolite by response surface methodology

Fungichromin production by Streptomyces sp. WP-1, an endophyte from Pinus dabeshanensis, and its antifungal activity against Fusarium oxysporum

Fermentation process and kinetics of novel antifungal antibiotic production

Optimization of fermentation conditions for xylanase production by engineered Pichia pastoris

Optimization of Fermentation Conditions for Trichodermin by the Mutant Strain UL60-11 of Trichoderma Taxi.

Enhancement of fungichromin production of Streptomyces sp. WP-1 by genetic engineering

Response Surface Methodology to Optimize Fermentation Technology of Brevibacillus brevis ch2-22

Studies on the Fermentation Condition Optimization of Fibrinolytic Enzyme Produced by Armiilaria Luteo-virens Sacc

Optimization of the Biosynthetic Conditions on FDP Production by Yeast Strain F15

Optimization of Fermentation for Production Conditions of Antibiotic by Bacillus amyloliquefaciens D1

Optimization of Fermentation Process, Extraction and Separation of Chaetoglobosin A

Fermentation Process Optimization of Novel Immunosuppressant Sanglifehrin A

Optimization of fermentation conditions for polymalic acid production by Aureobasidium pullulans BK-10

Medium Optimization for Enhanced Co-Production of Two Bioactive Metabolites in the Same Fermentation by a Statistical Approach

[Optimization of the medium and fermentation condition for the Penicillium aurantiocandidum Z12 strain with molluscicidal actions against Oncomelania hupensis]

Fermentation optimization for the zoanthid-derived fungus Cochliobolus lunatus to produce the resorcylic acid lactone LL-Z1640-2

Biotransformation optimization of betulin into betulinic acid production catalysed by cultured Armillaria luteo-virens Sacc ZJUQH100-6 cells.

Optimization of fermentation conditions for production of xylanase by a newly isolated strain, Penicillium thiersii ZH-19

Optimization of Fermentation Medium for Production of Antibacterial Peptides by Bacillus Subtilis BSD-2

Optimization of fungal chitosan production from Cunninghamella echinulata using statistical designs