Abstract:Particle deposition on the surface of a drying chamber is the main drawback in the spray drying process, reducing product recovery and affecting the quality of the product. In view of this, the potential application of chemical surface modification to produce a hydrophobic surface that reduces the powder adhesion (biofouling) on the wall of the drying chamber is investigated in this study. A hydrophobic polydimethylsiloxane (PDMS) solution was used in the vertical dipping method at room temperature to determine the optimum coating parameters on borosilicate glass and stainless steel substrates, which were used to mimic the wall surface of the drying chamber, to achieve highly hydrophobic surfaces. A single-factor experiment was used to define the range of the PDMS concentration and treatment duration using the Response Surface Methodology (RSM). The Central Composite Rotatable Design (CCRD) was used to study the effects of the concentration of the PDMS solution (X1, %) and the treatment duration (X2, h) on the contact angle of the substrates (°), which reflected the hydrophobicity of the surface. A three-dimensional response surface was constructed to examine the influence of the PDMS concentration and treatment duration on contact angle readings, which serve as an indicator of the surface's hydrophobic characteristics. Based on the optimisation study, the PDMS coating for the borosilicate glass achieved an optimum contact angle of 99.33° through the combination of a PDMS concentration of X1 = 1% (w/v) and treatment time of X2 = 4.94 h, while the PDMS coating for the stainless steel substrate achieved an optimum contact angle of 98.31° with a PDMS concentration of X1 = 1% (w/v) and treatment time of X2 = 1 h. Additionally, the infrared spectra identified several new peaks that appeared on the PDMS-treated surfaces, which represented the presence of Si-O-Si, Si-CH3, CH2, and CH3 functional groups for the substrates coated with PDMS. Furthermore, the surface morphology analysis using the Field Emission Scanning Electron Microscopy (FESEM) showed the presence of significant roughness and a uniform nanostructure on the surface of the PDMS-treated substrates, which indicates the reduction in wettability and the potential effect of unwanted biofouling on the spray drying chamber. The application of PDMS and PTFE on the optimally coated substrates successfully reduced the amount of full cream milk particles that adhered to the surface. The low surface energy of the treated surface (19–27 mJ/m2) and the slightly higher surface tension of the full cream milk (54–59 mJ/m2) resulted in a high contact angle (102–103°) and reduced the adhesion work on the treated substrates (41–46 mJ/m2) as compared to the native substrates.

Moisture Proof of Membrane-coating Sirolimus Dropping Pills

An Update of Moisture Barrier Coating for Drug Delivery

A bioinspired phospholipid polymer as drug-laden coating for biomedical device

Delayed Sustained Drug Release from Electrostatic Powder Coated Tablets with Ultrafine Polymer Blends

Preparation of Sustained Release Capsules by Electrostatic Dry Powder Coating, Using Traditional Dip Coating As Reference

Electrostatic powder coated osmotic pump tablets: Influence factors of coating powder adhesion and film formation

Effect of Surface Property on the Release and Oral Absorption of Solid Sirolimus-Containing Self-microemulsifying Drug Delivery System

Sirolimus Solid Self-Microemulsifying Pellets: Formulation Development, Characterization and Bioavailability Evaluation.

Solid Self-Nanoemulsifying Cyclosporine A Pellets Prepared by Fluid-Bed Coating: Stability and Bioavailability Study

Solid Self-Nanoemulsifying Cyclosporin A Pellets Prepared by Fluid-Bed Coating: Preparation, Characterization and in Vitro Redispersibility

Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Hydration Induced Material Transfer in Membranes of Osmotic Pump Tablets Measured by Synchrotron Radiation Based FTIR.

Sequence analysis of cDNA and genomic DNA for a putative pertussis toxin-insensitive guanine nucleotide-binding regulatory protein alpha subunit.

Enhancing the solubility and dose delivery of drospirenone through oxidized regenerated cellulose hydrogel compound with liposome system

Response Surface Optimisation of Polydimethylsiloxane (PDMS) on Borosilicate Glass and Stainless Steel (SS316) to Increase Hydrophobicity

Chemical surface modification of mesoporous SiO 2 -based membranes for fine-tuning of drug loading and release properties

Co-delivery of honokiol, a constituent of Magnolia species, in a self-microemulsifying drug delivery system for improved oral transport of lipophilic sirolimus.

Investigation of Rheological Properties of Molten Materials for Dripping Pills Based on Imaging Monitoring

Osmotic tablet coatings: Drying stress, mechanical properties and microstructure

Coating of Sodium Percarbonate Particles Using Water Soluble Materials in a Fluidised Bed to Achieve Delayed Release in Aqueous Environment

A novel controlled porosity osmotic pump system for sodium ferulate