Abstract:Abstract The axial cyclone separator has simple structure, operates to reducing dust concentration in grain storehouses, and features low production cost, and convenient installation. Aiming to obtain the separation characteristics of an axial flow guide separator, the particle wall collision and the performance of multi-tubes were simulated with Fluent. The renormalization group (RNG) k − ε model was used to study the turbulent modeling and the user define function (UDF) was used to calculate the particle-wall collision. The simulation and experimental results were compared to verify the computation model. The results showed that the basic feature of the flow pattern remains stable and the separation efficiency of 800 kg/m 3 particles is higher than 2650 kg/m 3 particles when the inlet velocity increases from 2 to 5 m/s. When the inlet velocity was 5 m/s, the normal velocity restitution ratio had a significant effect on the efficiency, the separation efficiency of 167 μm particles changed from 76.74 to 97.93% and a smaller normal velocity restitution ratio had a higher the efficiency. In comparison, the efficiency remained unchanged when changing the tangential velocity restitution ratio. Furthermore, the effects of three target wall materials on the separation efficiency were investigated. And the simulated efficiency the of 296 μm particle of 2024 aluminum, 410 stainless steel and Ga1–4V titanium were 82.15, 79.52 and 77.53% respectively. Besides, effects of tube diameter on performances of cyclone separator were discussed and high intense collisions between particles and walls may occur in a small diameter of cyclone tube, causing deteriorated separation performance. Moreover, with the addition of the dust chamber, the efficiency of cyclone used in combination is slightly improved since the vortex in the exhaust pipe has been finely changed.

Membrane Separation Device Based on Fluent Software of Numerical Simulation

Analysis of the Flow Characteristics of Diffuser/Nozzle Based on MEMS

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

Computational fluid dynamics applied to membrane processes for water treatment

Study on Separation Performance of Tri-Cone Water Medium Cyclone Based on CFD

Numerical Simulation Study on Separation Performance of Cyclone Separator Based on Fluent

Effect of Pervaporation Module Structure on Separation Performance

Numerical simulation of the effects of the internal components on the uniformity of the flow field in a tubular separator

Simulation research on the flow field performance of the supersonic separator for natural gas

Numerical Simulation of Membrane Separation Characteristics of Supercritical Carbon Dioxide and Water

Numerical simulation on gas–liquid separation characteristics in a GLCC‐horizontal combined separator

Numerical Simulation of Single-Phase and Two-Phase Flows in Separator Vessels with Inclined Half-Pipe Inlet Device Applied in Reciprocating Compressors

Simulation calculation of cyclone separation efficiency

Experimental investigation on separation characteristics of axial cyclone separator

Mathematical and Experimental-Analysis of Air Separation by Hollow-Fiber Membranes

Study Of The Numerical Solving Methods Of The Motion Model Of Polydispersed Droplets

Numerical simulation of the particle-wall collision strength and swirling effect on the performance of the axial flow cyclone separator

Numerical Simulating the Gas-solid Flow in Square Cyclone With a Curved Inlet

Numerical Simulation and Experimental Study on the Performance of Gas/Liquid Spiral Separator

Numerical Investigation on Performance of Moisture Separator: Experimental Validation, Applications and New Findings