ASeveral Methods on Improving Teaching of Calculus

Li CHEN,Xin-tao GAO,Jing CHEN

2014-01-01

Abstract:Integrated with the experiences of practical teaching activities, some methods on improving teaching of calculus are proposed. Such as the introduction of new lessons, teaching design, exercise class setting, assessment methods and so on. Finally, a large number of teaching examples illustrate how to improve it.

What problem does this paper attempt to address?

Preliminary Research on Teaching Methods of the Elective Course for Senior Student——From Reform of Teaching Method for the Course Introduction to Systems Engineering

Zhou Lifang,Liang Jun,Wang Hui,Xie Yiling

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.025

2012-01-01

Abstract:The purpose of elective courses is to respect the personality development of students,to expand the student's knowledge and improve their overall quality.However,due to various reasons,the quality of teaching of elective courses is generally not satisfactory.The possible reason is analyzed and ideas to improve the quality of teaching of elective courses are discussed,combined with the reform of teaching method for the course Introduction to Systems Engineering.
Optimization of Teaching System for the Course of Process Control Engineering

Dai Liankui,Yu Ling

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.014

2012-01-01

Abstract:For the course,Process Control Engineering,this paper improves normal teaching objectives and teaching contents,and proposes an optimized teaching system to satisfy the requirement of modern process industries to control engineers.In addition to instruct basic control algorithms and control system analysis,control system designing and implementation are emphasized.Teaching practice in recent years has shown the integrality and effectiveness of the new teaching system,which has an obvious effect on training control engineers with strong innovation ability and engineering application techniques.
Independent Design and Integrated Simulation Teaching Method in Process Control Engineering

Yu Ling,Dai Liankui

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.026

2012-01-01

Abstract:Process Control Engineering is a very practical course and the main contents are control system analysis,design and application.To stimulate learning enthusiasm of students and deepen their understanding of the contents of teaching,the independent design and integrated simulation teaching method is employed.Several typical process control problems are given,and each student must select one problem and solve it independently.Students need to build models,design and simulate control strategies,and write research reports.Finally,guided by the teacher,the classroom discussion is carried out.This teaching method can greatly upgrade the student's ability in identifying,analyzing and solving problems.
Calculus Teaching Supported by the Studies on Math-Physical Knowledge Systems with Dissemination Methods

Xilin XIE

DOI: https://doi.org/10.15943/j.cnki.fdxb-jns.2018.02.014

2018-01-01

Abstract:This paper is aimed at the ideas and methods of studies on math-physical knowledge systems with their dissemination in the point of view of methodology.And the general ideas and methods have been applied to the calculus teaching,including the conclusion to a certain extent of the major ideas and method of calculus in Euclidian space.It is worth pointing out that the indicated ideas and methods can be adopted to other math-physical courses.
Discussion on Teaching Method Improvement in the Course of Elasticity

Wen-juan LOU,Hong-chao LIANG,Li-xian YANG

DOI: https://doi.org/10.3969/j.issn.1671-9719.2015.07.013

2015-01-01

Abstract:This article discussed the solutions of some issues in teaching elasticity .The issues are about complicated concepts , abstract contents and reduction of class .This paper proposed a combination of Just - In - Time - Teaching and preparing before class ,a combination of Computer - supported collaborative learning and discussion after class ,focusing onteaching purposes . After that ,combined those measures with teaching evaluation .This paper aims to promote more innovative and effective meth‐ods in teaching elasticity .
Improving on Teaching Effects of Thermodynamics, Heat Transfer and Fluid Mechanics

Chen Ai

2004-01-01

Abstract:According to teaching experience of these years on the course of Thermodynamics, Heat transfer and Fluid mechanics, the author contribute some idea on how to make this course simpler, easier and more in-teresting. The ways of improving teaching methods and cultivating creative thinking ability of students used in the teaching process are hoped to be helpful for us.
The Practice to Improve Teaching Effect by Seminar

Chen Ruoyu,Zhu Jianfei,Wang Guoping

DOI: https://doi.org/10.3969/j.issn.1000-6168.2007.06.011

2007-01-01

Abstract:Seminar is an effective way to stimulate student's the initiative of studying and to improve teaching quality.The key steps in seminar have been discussed by taking the course "Advance Inorganic Chemistry" as an example.The results show that the necessary factors are composed of suitable topic,sufficient preparation,skilled organization,essential summary and self-summary.
Improvement of the Major Course Teaching for the Comprehensive Quality of the Undergraduates

Wang Hui,Xie Yiling,Zhang Guangxin,Zhou Lifang,Song Chunyue

DOI: https://doi.org/10.3969/j.issn.1000-6168.2012.02.005

2012-01-01

Abstract:From the viewpoint of undergraduate cultivation,this paper provides an insight into distinctive properties of the major course and classifies them into three stages.The philosophy of teacher-oriented and student-centered should cover the whole process of teaching,and teachers should make it their business to cultivate high qualified students.Based on the author's experience in the process of teaching and research,how to integrate quality education with liberal education and professional education is introduced,moreover,some idea about cultivating students is also provided.
Toward New Vision in Teaching Calculus

Seifedine Kadry,Maha ElShalkamy

DOI: https://doi.org/10.48550/arXiv.1212.6040

2012-12-25

Computers and Society

Abstract:Usually the first course in mathematics is calculus. Its a core course in the curriculum of the Business, Engineering and the Sciences. However many students face difficulties to learn calculus. These difficulties are often caused by the prior fear of mathematics. The students today cant live without using computer technology. The uses of computer for teaching and learning can transform the boring traditional methodology of teach to more active and attractive method. In this paper, we will show how we can use Excel in teaching calculus to improve our students learning and understanding through different types of applications ranging from Business to Engineering. The effectiveness of the proposed methodology was tested on a random sample of 45 students from different majors over a period of two semesters.
Refining Calculus Pedagogy

Parthasarathy Srinivasan

2024-09-16

Abstract:There have been several modifications of how basic calculus has been taught, but very few of these modifications have considered the computational tools available at our disposal. Here, we present a few tools that are easy to develop and use. Doing so also addresses a different way to view calculus, and attempts to fill the gaps in students' understanding of both differentiation and integration. We will describe the basics of both these topics in a way that might be much more useful and relevant to students, and hence possible ways in refining calculus pedagogy to make calculus more accessible to them. For integration, an elementary development of Gaussian quadrature using basic linear algebra is presented. This numerical method can be extended to integrate functions over various domains in higher dimensions, a subject that is not currently well covered in multivariable calculus or other Mathematics courses. We also briefly discuss series that may be more useful than some of those taught in current calculus courses.

History and Overview
The Thought and Practice in Teaching Reform of "soil Mechanics"

Shi-min Zhang,Shi-xia Zhang,Gang Wei,Xing-jiang Wei

DOI: https://doi.org/10.5815/ijeme.2013.01.10

2011-01-01

Abstract:"Soil Mechanics" is a degree course in Zhejiang University City College of Civil Engineering. The teaching group of this course has thought and practiced the reforms in teacher-student interaction, attendance innovation, materials selection, layout of the homework and the form of practice teaching. Simplifying the derivation of calculation formulas and strengthening the experiment and practice which can develop the students' manipulative ability and innovative spirit. Interacting with students which can make them learn more about the teacher and this course. At the same time, teachers can understand better about the students' thinking, then adapt and improve each other. The reform of teaching material selection and arrangement of work which make students have more examples to refer. The free choice in after-school subject which allow students to sum up the knowledge points and that would enable the consolidation of classroom teaching. At the same time, by consulting reference books, students will find the knowledge points which the teacher did not emphasized.
Discussion about teaching styles of discerete mathematics

Wu Jiangqin,Lin Lanfen,Zhang Sanyuan,Qian Yuntao

DOI: https://doi.org/10.1109/ICCSE.2009.5228333

2009-01-01

Abstract:In this paper, different types of quizzes in class, the active engagement of the students in the class and the transparency of the evaluation system are proposed to enhance the teaching performance of discrete mathematics course. From our experiences, these methods efficient and effective for students to learn actively.
On High School Mathematics Teaching Methods

Deng Qiang

Abstract:High school math curriculum requires teachers through a variety of classroom teaching mode,enable students to independent learning,inquiry,and stimulate students 'initiative to develop students' creative thinking so that students master the mathematical way of thinking,we can more quickly acquire knowledge,but alsothorough understanding of knowledge.This article focuses on changes in teaching concepts,students' thinking awareness by teachers timely,appropriate,appropriate method of teaching skills,problem situation,the first guess card mode to explore the high school mathematics teaching methods.

Mathematics,Computer Science,Education
How to Improve the Classroom Teaching Quality of the Computer Theory Course

巫喜红

DOI: https://doi.org/10.3969/j.issn.1672-5913.2011.18.010

2011-01-01

Abstract:From the teachers,teaching methods,teaching materials,style of study,style of examination,extracurricular activities,etc,the paper expounds the methods and means which how to improve the classroom teaching quality of the computer theory course.The effect which the application of analog methods and teaching cases in the courses such as the VB,the VFP and the computer introduction is very well.
Research of Numerical Methods for Engineering Course with New Engineering Feature

Guizhong Xie,Minmin Wei,Huan Xie,Hongwei Li,Feng Zhao,Hao Li

DOI: https://doi.org/10.12783/dtssehs/esem2019/29738

2019-01-01

Abstract:This paper focuses on the course teaching system reform for numerical methods for engineering with new engineering feature. The course of numerical methods for engineering has strong theoretical knowledge, complicated experiments and calculation, which is difficult to active the students' attention. Thus the existing curriculum system should be reformed. Take the course of numerical methods for engineering in Light industrial mechanics department for example. Firstly, based on the teaching idea, strengthen the process of the students in school education. Introduce interaction between students and teachers; promote initiative of students, continuous improvement to achieve leapfrogging. Secondly, improve the teaching methods and means. Breaks the traditional teaching mode and emphasizes students' participation consciousness. Put the students in the central position of classroom teaching and fundamentally change the students' class status. Then, design the teaching content, the course can be divided into several modules to give lectures and arrange discussion between students and teachers. Fourthly, modularize method and continuous improvement is applied in our teaching thoroughly, and guide the students to participate in teaching processing actively. Finally, establish a perfect assessment way, sum up experience timely, and constantly revise and improve our reform. With these, a good start can be made for the reform for numerical methods for engineering in new engineering education.
Development And Application Of Simulation Assistant Teaching System For Mathematical Modeling Course-An Example From The Discipline Of Information And Computational Science

Xinjie Yu,Xin Yu,Huanda Lu,Liangzhong Fan,Zhenyu Shu,Kangsheng Liu

2011-01-01

Abstract:In this paper, a simulation assistant teaching system for mathematical modeling course based on the characteristics of the teaching in the discipline of information and computational science is developed, The simulation assistant teaching system can import the typical cases of mathematical modeling into teaching practice by computer simulation technology, and visually simulate the mathematical modeling, the solution and the results presentation processes. By using this system, students can refine their thinking of mathematical modeling effectively, and learn with the teacher actively. The application results show that the developed simulation assistant teaching system is an effective way for teaching in mathematical modeling course.
The Practical Study of the Professional but Non-Required Courses

YE Pei-qing,SHI Chuan,ZHANG Hui

DOI: https://doi.org/10.3969/j.issn.1002-4956.2007.04.031

2007-01-01

Abstract:Taking the course of Numerical Control as an example, discusses how to process the professional but non- required courses of the 4th year undergraduate students. Through relevant research, a couple of reformatory ideas and specific measures are indicated, such as the attempting of adapting new teaching methods and adjusting the teaching contents, which could improve the efficiency of those courses, so that seizes teaching and learning in a hand- in- hand way. The teaching reformation that has been adopted in the course of Numerical Control indicates that those ideas and methods could enhance students' positivities, facilitate the cultivation of their creativities, and have received positive and efficient effects.
MES Teaching of Mathematical Analysis in Engineering Colleges

Ruilan TIAN,Xiuying GUO,Qiubao WANG,Lili ZHANG,Hua LI

DOI: https://doi.org/10.16400/j.cnki.kjdkx.2016.02.047

2016-01-01

Abstract:Taking mathematical analysis in engineering colleges as research subject, the modularity of teaching content and exam judgment is used to reconstruct teaching content and judgment system. Combining key majors in engineering colleges, the case teaching approach is applied to transfer research achievement into teaching content and promote the interaction be-tween research and teaching. Great attention is paid to assessing the abilities and results of students in the process of study. The results of this paper can provide references for cultivating practical, versatile and skilled talents.
Improving the Quality of Advanced Mathematics Teaching in a Leveled Education Model

WANG Ke,CHEN Jian

DOI: https://doi.org/10.3969/j.issn.1008-5475.2007.03.029

2007-01-01

Abstract:Based on the teaching experience of the author,this paper gives some ideas as to how to teach advanced mathematics to different levels of students in vocational colleges.
Teaching Reform of “Probability Theory and Mathematical Statistics” Under the Background of New Engineering

Jianxin Wang

DOI: https://doi.org/10.26689/jcer.v8i3.6361

2024-03-24

Journal of Contemporary Educational Research

Abstract:Probability theory and mathematical statistics are fundamental courses for various majors in science and engineering. In response to the current teaching situation, we should integrate theory with practice, implement teaching reform, and carry out teaching innovation. The article carries out blended teaching with deep integration of online and offline modes and within and outside of class, constructing innovative measures of “four integrations and four reshaping.” The article conducts diversified evaluations to stimulate learning motivation and help achieve talent cultivation goals. Through the close integration of probability theory and mathematical statistics course teaching with professional education and practical application, the “three-in-one” teaching goal of value shaping, ability cultivation, and knowledge exploration is achieved. The fundamental task of “cultivating morality and talents” is implemented.

ASeveral Methods on Improving Teaching of Calculus

Preliminary Research on Teaching Methods of the Elective Course for Senior Student——From Reform of Teaching Method for the Course Introduction to Systems Engineering

Optimization of Teaching System for the Course of Process Control Engineering

Independent Design and Integrated Simulation Teaching Method in Process Control Engineering

Calculus Teaching Supported by the Studies on Math-Physical Knowledge Systems with Dissemination Methods

Discussion on Teaching Method Improvement in the Course of Elasticity

Improving on Teaching Effects of Thermodynamics, Heat Transfer and Fluid Mechanics

The Practice to Improve Teaching Effect by Seminar

Improvement of the Major Course Teaching for the Comprehensive Quality of the Undergraduates

Toward New Vision in Teaching Calculus

Refining Calculus Pedagogy

The Thought and Practice in Teaching Reform of "soil Mechanics"

Discussion about teaching styles of discerete mathematics

On High School Mathematics Teaching Methods

How to Improve the Classroom Teaching Quality of the Computer Theory Course

Research of Numerical Methods for Engineering Course with New Engineering Feature

Development And Application Of Simulation Assistant Teaching System For Mathematical Modeling Course-An Example From The Discipline Of Information And Computational Science

The Practical Study of the Professional but Non-Required Courses

MES Teaching of Mathematical Analysis in Engineering Colleges

Improving the Quality of Advanced Mathematics Teaching in a Leveled Education Model

Teaching Reform of “Probability Theory and Mathematical Statistics” Under the Background of New Engineering