Abstract:Aiming at the problem of lower single granularity and uniformity of the existing air-suction seed-metering device under the condition of densely planted crops according to the agronomic requirements of soybean-maize strip intercropping mode, the disturbing effect of seeds on the seed-filling performance was studied to improve the seeding performance of the seed-metering device under the condition of high speed. Based on the theory of discrete element method (DEM), taking the air-suction seed-metering device designed for both soybean and maize as a model and maize variety of 'Zhengdan 958' suitable for densely planted as the research object, the DEM single-factor test was conducted on the influence of the structure, position, and number of bosses on disturbing performance with the average kinetic energy, average velocity, and average normal force of seeds as evaluation indexes. The results showed that the disturbing performance of seeds was better when the boss structure was D-type, the diameter of the base circle where bosses located was 160 mm, and the number of bosses was 13. To further improve the structural parameters of the D-type boss, the primary structural parameters, such as the side length and arc radius, were simulated by a single-factor test. The position, side length, and arc radius of the D-type boss were further optimized and verified using central composite design (CCD) based on the results of the single-factor test. The CCD results showed that the average kinetic energy of seeds was 7.39 × 10 −7 J, the average velocity was 4.53 × 10 −2 m/s, and the average normal force was 6.18 × 10 −2 N when the diameter of the base circle where bosses located at 159.865 mm, the side length and arc radius of the D-type boss of 5.690 mm and 5.476 mm, which significantly enhanced the disturbing performance of the seed-metering device. The optimized boss structures and parameters of the seed-metering device were validated with an all-factor test of working speed and working pressure. When the working speed and working pressure were 4 ~ 6 km/h and 7 ~ 7.5 kPa, the qualified rate was 94.75% ~ 97.49%, the multiple rate was 0.92% ~ 1.43%, and the leakage rate was 1.59% ~ 3.82%, all of which were substantially lower than the original one. Therefore, the seed-filling performance of the seed-metering device will be improved by increasing the disturbance of seeds to a certain extent.

Design and Seed-filling Test of Cell-type Precision Seed-metering Device with Vibration Technology

Movement Analysis of Rice Seed Embryo Ordering in Vibration Seed-Metering Device

Design and Experimental Analysis of an Air-Suction Wheat Precision Hill-Seed Metering Device

Design and experiment of a centrifugal filling and cleaning high-speed precision seed metering device for maize

Design of Ditch Filling-type Precision Seed-metering Device

Design and Experiment of Air-Suction Maize Seed-Metering Device with Auxiliary Guide

SIMULATION AND OPTIMIZATION OF THE SPOON-WHEEL TYPE MAIZE PRECISION SEED-METERING DEVICE BASED ON VIBRATION

Structural Design and Simulation Analysis of a Dual-Row Pneumatic Vegetable Precision Planter

Seed Metering Device Based on Orienting Ordered Arrangement in Embryo and Parameter Optimization

Motion Simulation and Experimental Analysis of Rice Seedling on Vibrating Board of Ordered Rice Seedling Thrower

Design and simulation for seeding performance of high-speed inclined corn metering device based on discrete element method (DEM)

DEM Study of Seed Motion Model-Hole-Wheel Variable Seed Metering Device for Wheat

Design and Experimental Analysis of a Stirring Device for a Pneumatic Precision Rice Seed Metering Device

Development of a novel perforated type precision metering device for efficient and cleaner production of maize

Seeding Performance Simulations and Experiments for a Spoon-Wheel Type Precision Cottonseed-Metering Device Based on EDEM

Design And Experiment of Axial Air-Suction Drum Seed-Metering Device

Test on adsorption posture and seeding performance of the high-speed precision dual-chamber maize metering device based on the seed characteristics

Design and experiment of a soybean shaftless spiral seed discharge and seed delivery device

DESIGN AND TEST OF NEGATIVE PRESSURE CHAMBER ROTARY BUCKWHEAT SEED METERING DEVICE

Design and experiment of a type hole wheel garlic seed metering device

Optimization and experiment of seed-filling performance of the air-suction densely planted seed-metering device based on DEM