Abstract:Tungstoborate heteropolyacid catalysts have good catalytic degradation performance, especially for selective cleavage of C–C bonds in biomass. In this paper, the product yield and component distribution of tungstoborate heteropolyacid (BW12)-catalyzed lignin liquefaction were investigated at different parameters, including temperatures (120, 140, 160, 180, and 200 °C), catalyst amount (0, 2.5, 5, 10, and 20 wt. %), and reaction time (0, 30, 60, 90, and 120 min). It was found that a higher conversion (72.16 wt. %) and bio-oil yield (68.41 wt. %) could be obtained under suitable reaction conditions (180 °C, 60 min, 5 wt. %). Bio-oil analysis showed that the BW12 catalyst had a significant effect on the distribution of bio-oil fractions, in which mono-aromatic components increased from 32.96% to 47.56% compared to those without the catalyst. In particular, carbonyl substances in the mono-aromatic components increased from 18.66% to 26.97%. Spectroscopic analysis (FT-IR) found that the absorption peaks of C–O and C–C bonds in the liquefied residue catalyzed by BW12 decreased compared to the raw lignin. Moreover, the mechanism of BW12-catalyzed lignin depolymerization was investigated by DFT simulations. The simulation results demonstrated that the shortening of Cα–O bond, the breaking of Cβ–Cγ and Cα–Cβ bonds in lignin promoted the formation of vanillin and benzaldehyde, 3-hydroxy-4-methoxy. Finally, based on the experimental data and simulation results, a possible reaction pathway for the BW12-catalyzed liquefaction of lignin into mono-aromatic substances was proposed.

Hydrothermal Depolymerization Characteristics of Alkali Lignin in Ru/C and Formic Acid/Formate System

Degradation of Alkali Lignin in Methanol

Solvothermal Liquefaction of Alkali Lignin to Obtain a High Yield of Aromatic Monomers While Suppressing Solvent Consumption

Catalytic Cleavage of the C-O Bonds in Lignin and Lignin Model Compounds by Metal Triflate Catalysts

Enzymatic hydrolysis of lignin by ligninolytic enzymes and analysis of the hydrolyzed lignin products

Catalytic hydrothermal liquefaction of alkali lignin at low temperature: Effect of acid and base catalysts on phenolic monomers production

Efficient lignin depolymerization with Ru- and W- modified bi-functional solid acid catalyst

Understanding Hydropyrolysis Mechanism of Β-O-4 Type Lignin Dimer

Effect of solvent systems on the synergistic catalytic hydrogenolysis of alkaline lignin over Pd/C-NaOH

Hydrothermal Depolymerization of Biorefinery Lignin-Rich Streams: Influence of Reaction Conditions and Catalytic Additives on the Organic Monomers Yields in Biocrude and Aqueous Phase

Comparative effects of the dual ACE-NEP inhibitor MDL-100,240 and ramipril on hypertension and cardiovascular disease in endogenous angiotensin II-dependent hypertension.

Enhancing the Efficacy of the Subcritical Water-Based Alkali Lignin Depolymerization by Optimizing the Reaction Conditions and Using Heterogeneous Catalysts

Efficient Lignin Depolymerization Process for Phenolic Products with Lignin-Based Catalysts and Mixed Solvents

Hydrothermal Decomposition of a Lignin Dimer under Neutral and Basic Conditions: A Mechanism Study

Depolymerization of Lignin by Catalytic Oxidation with Aqueous Polyoxometalates

Efficient Depolymerization of Alkaline Lignin to Phenolic Compounds at Low Temperatures with Formic Acid over Inexpensive Fe–Zn/Al2O3 Catalyst

Tungstoborate heteropolyacid-catalyzed lignin liquefaction: Product yield and component distribution

Mild depolymerization of alkaline lignin in a formic acid-choline chloride type deep eutectic solvent system

Metrics other than potency reveal systematic variation in responses to cancer drugs.

Efficient depolymerization of lignin through microwave-assisted Ru/C catalyst cooperated with metal chloride in methanol/formic acid media

Red mud catalysts for hydrothermal liquefaction of alkali lignin: Optimization of reaction parameters